BAL ACCU-Slide cable-driven slide rooms use different jamb assemblies and cable standoffs depending on the mechanism generation. This guide helps you distinguish the G4 Econo, Hybrid and ABS designs before choosing a replacement pulley bracket, wipe seal or jamb component.
See related replacement parts
Compare these product photos and part numbers with your existing component. Open any item to check its full listing before ordering.
Check the installed jamb and mechanism label
G4 Econo
Look for the mechanism identification on the main drive bracket. Compare the pulley bracket and outside cable standoff against the G4 Econo manufacturer sheet.
Hybrid
Look for the identification label inside the jamb. Jamb assemblies and outside standoffs differ from the G4 Econo versions.
ABS
Compare the installed jamb profile with the separate ABS manufacturer's illustrations. A matching appearance does not establish interchangeability with G4 or Hybrid components.
Original BAL illustrated system identification sheets
These factory documents show the jamb shape, cable standoff orientation, guide pulley, bracket layout and other generation-specific features. Compare the matching diagram with the actual installed assembly before purchasing parts.
On a phone, open the PDF separately to zoom into the jamb profiles and manufacturer labels.
Different generations need different parts
| Check | G4 Econo | Hybrid | ABS |
|---|---|---|---|
| Mechanism ID | Number on main drive bracket | System label inside jamb; check installed assembly | Identify ABS generation using manufacturer jamb figures and original equipment information |
| Jamb assembly | Match slide room opening and original jamb mounting | BAL lists complete manufacturer-specific jamb assemblies | Match ABS profiles and original assembly |
| Cable standoffs | G4 Econo outside standoffs differ from Hybrid | Hybrid outside brackets have different manufacturer numbers | Use ABS-specific illustrations |
| Seals | Certain wipe seals are RV-manufacturer supplied | R854056 jamb wipe seal is listed for Hybrid; other seals may be OEM-specific | Confirm ABS seal profile and application before replacement |
| Pulley brackets | Match left/right pulley and standard/double-back routing | Several assemblies are riveted and not individually replaceable | Use ABS-specific part breakdown; do not substitute another generation's bracket |
Before selecting jambs, seals or pulleys
Match the original mechanism model, the jamb shape and the installed part. Some jamb assemblies are dimension-specific. BAL identifies riveted Hybrid jamb components that are not individually serviceable; for these, replacement may require the complete manufacturer-specific assembly rather than a pulley alone.
For a separate corner pulley, compare the 22302L left-hand bracket and 22302R right-hand bracket against the factory illustrations. They are not universal substitutions for every ACCU-Slide jamb or double-back assembly.
For cable hardware and individual system identification, see the G4 Econo and Hybrid parts guide and the chain adjuster and pulley reinforcement guide.