Ancor 270201
Starter kit · one device
1 m power cable with tee, single tee, male and female end terminators, one 2 m drop cable
Ancor NMEA 2000 Starter Kits, Bulkhead & Field Connectors
An NMEA 2000 starter kit supplies a power connection, device tees, drop leads and two network-end terminators. If you are expanding or repairing an existing system, the bulkhead adapter and field-serviceable connectors perform different tasks. Compare the exact manufacturer numbers below before adding hardware.
Choose a starter kit for the number of devices
270201 · Single-device starter
A one-metre network power lead with tee, one single tee, one two-metre device drop and a male/female pair of network end terminators.
270202 · Dual-device starter
Includes the one-metre power tee, dual tee, male/female network end terminators and two two-metre drop cables for a two-device arrangement.
Ancor connector and kit part-number chart
| MPN | Type | Function or kit contents |
|---|---|---|
| 270201 | Starter kit · one device | 1 m power cable with tee, single tee, male and female end terminators, one 2 m drop cable |
| 270202 | Starter kit · two devices | 1 m power cable with tee, dual tee, male and female end terminators, two 2 m drop cables |
| 270107 | Bulkhead adapter | Provides a network connection point through a bulkhead or panel |
| 270109 | Female field-serviceable connector | Cable-end connector to terminate bulk cable physically or replace damaged female end; not a network resistor terminator |
| 270110 | Male field-serviceable connector | Cable-end connector to terminate bulk cable physically or replace damaged male end; not a network resistor terminator |
| 270114 | Inline network terminator | Designed to retain proper network-end termination at a drop-cable connection |
Plan the network and avoid connector mix-ups
- Choose 270201 for the manufacturer's single-device starter configuration, or 270202 for two device drops.
- Confirm network power location, cable routes, compatible electronics and total system length against the NMEA 2000 installation standards and equipment manuals.
- Use 270107 when a compatible connection is required through a bulkhead or panel.
- Use female 270109 or male 270110 to finish appropriate bulk cable or replace a damaged cable end. Neither is an end-of-backbone resistor terminator.
- Use the 270114 inline terminator only where its network-end connection arrangement is appropriate. Verify the two network-end terminations remain in place.
Important distinction: a field-serviceable cable-end connector and a network terminating resistor are separate parts. Ancor starter kits include the male and female end terminators; an additional connector should not be installed in place of either one.
Browse the NMEA 2000 parts and kits
Follow the exact Ancor number to compare the correct item and its product details.
Ancor 270202
Starter kit · two devices
1 m power cable with tee, dual tee, male and female end terminators, two 2 m drop cables
Ancor 270109
Female field-serviceable connector
Cable-end connector to terminate bulk cable physically or replace damaged female end; not a network resistor terminator
Ancor 270110
Male field-serviceable connector
Cable-end connector to terminate bulk cable physically or replace damaged male end; not a network resistor terminator
Ancor 270114
Inline network terminator
Designed to retain proper network-end termination at a drop-cable connection
Related cable and network references
See our Ancor NMEA 2000 backbone, tee and drop-cable selection guide when extending the network beyond a starter kit.
About NewRVParts
NewRVParts is an online-only source for brand-new RV parts and accessories, truck camper equipment, towing and trailer parts, truck accessories, and marine products. We serve customers throughout Canada and the United States, with products from trusted manufacturers shipped through a large North American distribution network. Shop online for replacement parts, equipment, and accessories delivered directly to your door.
Shop RV Parts