{"product_id":"curt-13629-class-iii-rear-receiver-hitch-without-drilling","title":"CURT 13629 Class 3 2-Inch Hitch – Ford Escape PHEV \/ Lincoln Corsair PHEV","description":"\u003cp\u003eCURT 13629 is a custom-fit 2-inch Class 3 receiver for Ford Escape plug-in hybrids from 2020–2026 and Lincoln Corsair plug-in hybrids from 2021–2026. CURT rates it for 2,000 lb trailer weight and 200 lb tongue weight, within the vehicle's limits. This application is specific to PHEV models.\u003c\/p\u003e\u003ch2\u003eSquare steel frame\u003c\/h2\u003e\u003cp\u003eManual and robotic welds form the vehicle-integrating square-tube construction. Bonderite covers the interior and exterior before co-curing with gloss black powder coat for rust, chip and UV resistance. No new drilled mounting holes are specified, but CURT requires enlarging existing mounting holes with a die grinder. Installation also involves temporarily lowering the exhaust, removing and reinstalling the EVAP heat shield, and fishwiring the supplied hardware. Estimated fitting time is 1.5 hours. The hitch is non-marine, excludes roll-pan use and contains no ball mount.\u003c\/p\u003e\u003ch2\u003eVerified vehicle fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFord Escape PHEV:\u003c\/strong\u003e 2020–2026 (plug-in hybrid only)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLincoln Corsair PHEV:\u003c\/strong\u003e 2021–2026 (plug-in hybrid only)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation and accessory notes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThe PHEV drivetrain is required; this application does not confirm fitment for gasoline-only or conventional hybrid models.\u003c\/li\u003e\n\u003cli\u003eCURT specifies no drilling and supplies installation hardware.\u003c\/li\u003e\n\u003cli\u003eNot compatible with bicycle racks that hang bicycles vertically.\u003c\/li\u003e\n\u003cli\u003eFollow the vehicle's allowable towing and tongue-weight ratings where lower than the hitch rating.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable class=\"data-table\"\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"25%\"\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr class=\"odd\"\u003e\n\u003ctd class=\"spec-name\"\u003eEstimated Install Time (Hours)\u003c\/td\u003e\n\u003ctd class=\"spec-value\"\u003e1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003ctd class=\"spec-name\"\u003eReceiver Size (IN)\u003c\/td\u003e\n\u003ctd class=\"spec-value\"\u003e2 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003ctd class=\"spec-name\"\u003eWeight Carrying Tongue Weight (LB)\u003c\/td\u003e\n\u003ctd class=\"spec-value\"\u003e200 Pound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003ctd class=\"spec-name\"\u003eWeight Carrying Capacity (LB)\u003c\/td\u003e\n\u003ctd class=\"spec-value\"\u003e2000 Pound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003ctd class=\"spec-name\"\u003eColor\/ Finish\u003c\/td\u003e\n\u003ctd class=\"spec-value\"\u003eBlack Gloss Powder Coated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003ctd class=\"spec-name\"\u003eClass\u003c\/td\u003e\n\u003ctd class=\"spec-value\"\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003ctd class=\"spec-name\"\u003eCutting Required\u003c\/td\u003e\n\u003ctd class=\"spec-value\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003ctd class=\"spec-name\"\u003eDrilling Required\u003c\/td\u003e\n\u003ctd class=\"spec-value\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003ctd class=\"spec-name\"\u003eFor Use With Roll Pan\u003c\/td\u003e\n\u003ctd class=\"spec-value\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003ctd class=\"spec-name\"\u003eIncludes Ball Mount\u003c\/td\u003e\n\u003ctd class=\"spec-value\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003ctd class=\"spec-name\"\u003eMarine\u003c\/td\u003e\n\u003ctd class=\"spec-value\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003ctd class=\"spec-name\"\u003eConstruction\u003c\/td\u003e\n\u003ctd class=\"spec-value\"\u003eSquare Tube Welded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003ctd class=\"spec-name\"\u003eMaterial\u003c\/td\u003e\n\u003ctd class=\"spec-value\"\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"CURT","offers":[{"title":"Default Title","offer_id":48431014314190,"sku":"13629","price":341.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_27d6510a-375f-40ec-b5f1-3b238e48a9a0.jpg?v=1791413605","url":"https:\/\/newrvparts.com\/en-ca\/products\/curt-13629-class-iii-rear-receiver-hitch-without-drilling","provider":"New RV Parts","version":"1.0","type":"link"}