Sea-Dog 201070-1
Small rectangular leaves for flush door or cabinet-edge mounting.
Sea-Dog Marine Door Hinges: Butt, Short-Side & Concealed
Replacing a boat cabinet or hatch-door hinge is easier when you compare the entire hinge, not only its outside dimensions. Sea-Dog makes flush-mortised butt hinges, unequal-leaf hinges for restricted mounting space, and a concealed design for doors where visible hardware is undesirable. The six models below are separate parts with different leaf layouts and screw requirements.
Compare Sea-Dog hinge part numbers
Dimensions are in inches and follow Sea-Dog's A × D drawing references unless otherwise noted. These figures are not a substitute for checking hole positions and door clearance.
| Manufacturer part no. | Hinge style | Drawing dimensions | Installation screws |
|---|---|---|---|
| 201070-1 | Compact mortised butt hinge | 1-1/4 × 1-1/2 in | 4 × #8 flat-head |
| 201080-1 | Rectangular butt hinge | 2 × 3 in | 6 × #8 flat-head |
| 201081-1 | Square butt hinge | 3 × 3 in | 6 × #8 flat-head |
| 201510-1 | Short-side door hinge | 2-1/8 × 1-1/2 in | 5 × #8 flat-head |
| 201530-1 | Door hinge | 2-7/8 × 1-1/2 in | 6 × #8 flat-head |
| 201954-1 | Flush concealed hinge | A 1-7/8; D 1-1/2 in | 5 × #6 flat-head |
Fasteners are separate. The screw counts and sizes above are Sea-Dog's specified installation requirements; flat-head screws are not supplied. Confirm the mounting substrate before selecting screws.
What to check before choosing a replacement
- Door and frame faces: identify whether the original hinge uses equal leaves, an unusually narrow leaf, or a concealed offset.
- Mortise and movement: note whether the leaves sit in recesses and whether the door swings clear of adjacent trim.
- Hole pattern: measure all existing screw centres; matching outer size alone does not establish a drop-in fit.
- Concealed hinge geometry: the 201954-1 has a separate B dimension of 2-3/4 inches. Compare its full shape rather than treating it as a standard rectangular butt hinge.
- Material: these six models use stamped 304 stainless steel. For hatch hinges with removable pins or different mounting geometry, see the separate hatch-hinge guide when available.
Explore matching products
Each card links to the exact Sea-Dog model in the NewRVParts catalog, so you can check product-level information before ordering.
Sea-Dog 201080-1
Equal one-inch leaves; intended for a flush-mortised installation.
Sea-Dog 201081-1
Equal 1-1/2-inch leaves on a larger square footprint.
Sea-Dog 201510-1
Unequal-width leaves help where one mounting face is narrow.
Sea-Dog 201530-1
Equal 1-7/16-inch leaves for a conventional surface layout.
Sea-Dog 201954-1
Concealed mounting; additional B dimension is 2-3/4 inches.
Related marine hardware
Hinges and latches solve different parts of a door or hatch installation. See our Sea-Dog anti-rattle and push-button latch guide for locking and retaining hardware, or explore Bimini top caps and inserts for marine frame fittings.
About NewRVParts
NewRVParts is an online-only source for brand-new RV parts and accessories, truck camper equipment, towing and trailer parts, truck accessories, and marine products. We serve customers throughout Canada and the United States, with products from trusted manufacturers shipped through a large North American distribution network. Shop online for replacement parts, equipment, and accessories delivered directly to your door.
Shop RV Parts