Replacing an RV privacy curtain or a damaged window track? Start by identifying the rail profile and the way the curtain attaches. JR Products Type B I-beam, Type C internal-slide and Type D slide-tape tracks use different hardware, and RV Designer GLIDE-TAPE is another distinct system. The matching parts below are grouped by those mechanisms so you can compare them before ordering.
Four RV curtain track families
Type B β exposed I-beam
Wheeled carriers move along an I-beam rail. JR 80241 is a 48-inch Type B track; use the compatible 81835 I-beam end stop.
Type C β internal-slide rail
Carriers or matching sew-in tape move within an enclosed track. JR 80321 and 80351 are wall-mounted Type C rails.
Type D β slide-tape rail
Designed for 1/2-inch slide tape. Choose a ceiling or wall rail and pair it with the matching Type D tape and end stops.
RV Designer GLIDE-TAPE
RV Designer A201 and A202 are 45-inch tracks intended for the brand's A115 sew-in GLIDE-TAPE. Do not identify these by colour alone.
These simple graphics indicate how rail and curtain components relate; they are not dimensioned manufacturer cross-sections or an assertion that shapes are interchangeable.
Match the track, carrier or tape, and end stop
| Track family | Mechanism | Matching track options | Matching hanging hardware | End retention |
|---|---|---|---|---|
| JR Type B | I-beam | 80241 (48 in) | 81155 wheeled hook carriers | 81835 I-beam stops |
| JR Type C | Internal-slide | 80321 (48 in), 80351 (96 in) | 81265 sew-in carriers or 81355 slide tape | 81205 Type C stops |
| JR Type D | 1/2-inch slide tape | 80371 (96 in ceiling), 80401 (96 in wall) | 81365 sew-in slide tape | 81385 Type D stops |
| RV Designer GLIDE-TAPE | Separate wall/ceiling track system | A201 (45 in ceiling), A202 (45 in wall) | A115 GLIDE-TAPE (72 in) | Confirm compatible end hardware |
Important Type B detail: JR Products identifies 81835 as the I-beam end stop for its 80241 and 80251 rails. The separate JR 81195 stop is intended for Type B rails with a flat bottom and does not fit those I-beam tracks. The Type letter alone is not enough to choose that particular stop.
Check these details before ordering curtain hardware
Track cross-sectionCompare the original rail, preferably at an exposed end. Identify an I-beam, an internal-slide opening, or a tape-glide profile; they receive different carriers.
Mounting direction and lengthMeasure the installed run and note ceiling versus wall mounting. A 96-inch track and a 45-inch rail are not simply alternate parts for the same opening.
Curtain attachmentLook for sewn-in carriers, snap tape, wheeled hooks or continuous sewn glide tape. Confirm how the fabric connects before purchasing track components.
A complete replacement may require a rail, matching carriers or tape, and suitable end retainers. Only order additional pieces that your installation actually uses; some existing hardware may be reusable.
Matching curtain parts with product photographs
JR Type B I-beam rail and hardware
JR Products 80241 β 48-inch Type B I-beam trackAluminum I-beam rail. Use the I-beam end stop 81835, not 81195.View part and availability
JR Products 81155 β Type B wheeled hook carriers14 wheeled carriers with hooks for Type B track.View part and availability
JR Products 81835 β I-beam curtain end stopsPair of retainers specified for JR Type B I-beam rails 80241 and 80251.View part and availability
JR Type C internal-slide components
JR Products 80321 β 48-inch Type C wall trackBrown plastic internal-slide rail for wall mounting.View part and availability
JR Products 80351 β 96-inch Type C wall trackWhite plastic internal-slide rail for wall mounting.View part and availability
JR Products 81265 β Type C small sew-in carriers14 white sew-in carriers for Type C tracks.View part and availability
JR Products 81355 β 72-inch Type C sew-in slide tapeWhite nylon webbing that is sewn to the curtain for Type C rails.View part and availability
JR Products 81205 β Type C end stopsPair of Type C track retainers with mounting hardware.View part and availability
JR Type D slide-tape components
JR Products 80371 β 96-inch Type D ceiling trackWhite ceiling-mounted rail for 1/2-inch slide tape.View part and availability
JR Products 80401 β 96-inch Type D wall trackWhite wall-mounted rail for 1/2-inch slide tape.View part and availability
JR Products 81365 β 72-inch Type D slide tapeFlexible plastic sew-in tape for Type D tracks.View part and availability
JR Products 81385 β Type D end stopsPair of white plastic end retainers for Type D track.View part and availability
RV Designer GLIDE-TAPE track and tape
RV Designer A201 β 45-inch ceiling GLIDE-TAPE railWhite ceiling-mounted GLIDE-TAPE track made for RV Designer A115 tape.View part and availability
RV Designer A202 β 45-inch wall GLIDE-TAPE railWhite wall-mounted GLIDE-TAPE track made for RV Designer A115 tape.View part and availability
RV Designer A115 β 72-inch GLIDE-TAPESew-in glide tape for RV Designer A201 ceiling and A202 wall rails.View part and availability
More RV interior repair guides
For drawer storage hardware, see the drawer slides, rear sockets and repair parts guide. For cupboards and overhead doors, see cabinet hinges and lift supports and cabinet latches and catches.