MORryde Quick Connect Steps STP-221

MORryde Quick Connect is an RV entry-step system that attaches to two exterior mounting brackets and can be detached when not needed. A quick-release latch holds the staircase to the brackets, while adjustable legs support the lower end on the ground.

These steps are rated for 500 lb. Unlike folding StepAbove models that stow inside an RV doorway, Quick Connect installations use exterior brackets and require adequate mounting structure below the entry threshold.

MORryde Quick Connect step size chart

Measure from the top of the RV entry threshold to level ground. Compare that height to the exact range in the manufacturer chart, then choose a two-, three- or four-step system.

Part number	Step count	Threshold-to-ground height	Step rise
STP-221	2	21½–27½ in	9 in
STP-222	3	27½–36 in	8 in
STP-223	4	35½–44 in	8 in

STP-221 is the two-step model for shorter entries. STP-222 provides three treads; STP-223 is the four-step version for higher entrances. The ground-height ranges overlap slightly, but other vehicle and mounting clearances must also be checked.

Quick Connect mounting-bracket and latch diagrams

The original MORryde instructions illustrate the first bracket aligned to the outer edge of the doorway, the steps used to position the second bracket, and the mushroom-head latch that releases the stair assembly.

MORryde STP-221 2-step removable Quick Connect assembly product photograph — Factory Quick Connect installation instructions with illustrated bracket positions. View the full-size manufacturer drawing and instructions.

MORryde STP-222 3-step removable Quick Connect assembly product photograph — Factory Quick Connect installation instructions with illustrated bracket positions. View the full-size manufacturer drawing and instructions.

Bracket 1Position it at the doorway after checking the staircase's placement and door swing.

Bracket 2Use the attached staircase to establish the second bracket position rather than assuming both brackets are spaced uniformly.

Quick-release latchPress the mushroom-head handles to disconnect the step assembly from the bracket pins.

Complete Quick Connect entry-step photos

These exact MORryde model numbers link to the matching NewRVParts products. Use the step-height chart to narrow the selection.

STP-2212-step removable Quick Connect assemblyView product

STP-2223-step removable Quick Connect assemblyView product

MORryde STP-223 4-step removable Quick Connect assembly product photograph

STP-2234-step removable Quick Connect assemblyView product

Mounting space and framing requirements

MORryde requires a minimum of 1¾ inches between the lower edge of the threshold and the opening for the original steps. The brackets also need reinforced framing behind the trailer skirting and below the threshold. Exterior trim directly below the threshold may prevent installation.

The factory instructions describe predrilling and attaching the two brackets with suitable hardware. Because the mounting surfaces vary by RV, confirm the structural backing and attachment method before fitting the system.

Fit and safety: Quick Connect brackets must attach to a structurally suitable surface. Confirm ground clearance, stable foot contact and door operation before use. Remove and secure the steps for travel as directed by MORryde.

Other RV entry-step references

Factory documentation: MORryde Quick Connect qualifier and bracket installation drawings.

About NewRVParts

NewRVParts is an online-only source for brand-new RV parts and accessories, truck camper equipment, towing and trailer parts, truck accessories, and marine products. We serve customers throughout Canada and the United States, with products from trusted manufacturers shipped through a large North American distribution network. Shop online for replacement parts, equipment, and accessories delivered directly to your door.

Shop RV Parts

MORryde Quick Connect Removable Step Parts & Mounting Guide