JR Products 10935
Fleetwood-style end-mounted trigger with two-inch mounting-hole spacing.
JR Products Compartment Trigger Latches: End, Flush & Offset
The trigger latch behind an RV baggage door must match the door's mounting arrangement and operating linkage. JR Products offers distinct Fleetwood-style end mounts, standard end mounts, flush mounts and offset mounts. This comparison is based on the mounting dimensions of four exact replacement parts.
Trigger latch mounting dimensions
These are manufacturer-listed measurements for the specific JR Products part numbers, not a guarantee that similarly mounted RV compartment doors use the same latch.
| JR MPN | Mount style | Mounting-hole spacing | Overall length |
|---|---|---|---|
| 10935 | End mount, Fleetwood-style | 2 in on centre | 4.20 in |
| 10945 | End mount | 3 in on centre | 3.34 in |
| 11705 | Flush mount | 1.343 × 1.87 in pattern | 3.75 in |
| 11715 | Offset mount | 3 in on centre | 3.21 in |
Three-inch mounting holes do not mean interchangeable latches. Parts 10945 and 11715 both use holes 3 inches apart, but 10945 is end-mounted while 11715 is offset-mounted. The flush-mounted 11705 uses a different two-dimensional hole pattern of 1.343 × 1.87 inches.
Before choosing a replacement
- Choose the mounting style: 10935 is a Fleetwood-style end mount, 10945 a 3-inch end mount, 11705 a flush mount and 11715 an offset mount.
- Match screw spacing: measure from screw centre to screw centre and also compare how the latch sits against the panel.
- Check body length: the manufacturer lists 4.20 inches for 10935, 3.34 for 10945, 3.75 for 11705 and 3.21 for 11715.
- Inspect cable or rod actuation: some compartment doors operate trigger latches through separate linkages, which must be checked before repair.
- Confirm operation: test that the latch fully engages and releases while the door is supported, before normal use.
Find the matching JR Products parts
These exact products can be purchased online through NewRVParts and ship from supplier warehouses. In-person viewing and pickup are not available.
JR Products 10945
End-mounted trigger with three-inch mounting-hole spacing, unlike the two-inch Fleetwood pattern.
JR Products 11705
Flush-mounted trigger with a rectangular mounting pattern. Do not select from overall length alone.
JR Products 11715
Offset-mounted trigger; although it shares three-inch hole spacing with 10945, its mounting form differs.
Related compartment door reference
To match another form of locking handle, compare JR Products locking handles and inside cams. For components that hold a compartment door open, visit JR Products door holders and spring catches.
About NewRVParts
NewRVParts is an online-only source for brand-new RV parts and accessories, truck camper equipment, towing and trailer parts, truck accessories, and marine products. We serve customers throughout Canada and the United States, with products from trusted manufacturers shipped through a large North American distribution network. Shop online for replacement parts, equipment, and accessories delivered directly to your door.
Shop RV Parts