Interior RV roof-vent insulators and shades reduce direct heat transfer or sunlight through an existing ceiling opening. Camco offers foam inserts for standard 14-by-14-inch vents, a longer 14-by-22-inch skylight insert and lighter reflective or vinyl shades. These accessories mount inside the RV rather than replacing the exterior roof cover or hinged vent lid.

Foam insulation, skylight insert or shade?

Standard 14-inch vent foam inserts

Camco 45192 and 45195 have white removable covers, but only 45192 has the reflective backing. The black 45196 also has reflective backing. All three are identified for compatible 14-by-14-inch interior openings.

Longer 14-by-22-inch skylights

Camco 45197 is the longer silver model with a removable cover. Do not try to match it to a standard square vent based on the 14-inch side alone.

Simple interior vent shade

Camco 42913 is a cream vinyl vent shade with mounting hardware. It is not a thick foam block and should not be used as a structural roof-vent part.

Removable reflective Sunshield

Camco 45191 is a 17½-inch-square reflective shade fastened with hook-and-loop strips. Measure the trim area; its outside dimensions are different from the nominal 14-inch opening.

Camco roof-vent insulation model chart

Camco MPN Accessory Listed size Cover or finish Key difference
45192 Foam vent insulator 14 × 14 in White removable cover 3-inch foam with reflective backing
45195 Foam vent insulator 14 × 14 in White removable cover 3-inch foam without reflective backing
45196 Foam vent insulator 14 × 14 in Black removable cover Foam with reflective backing
45197 Skylight insulator 14 × 22 in Silver removable cover For compatible longer skylight openings
42913 Interior vent shade 14 × 14 in Cream vinyl shade Mounting hardware included; not a foam insert
45191 Reflective sunshield 17½ × 17½ in Reflective thermal barrier Hook-and-loop fastening; not foam plug
These accessories provide shade or insulation at the interior opening. They do not repair roof leaks or replace an exterior roof-vent dome, lid or fan assembly.

Measure before choosing an insulation insert

  1. Measure the clear ceiling opening and the surrounding interior trim. A 14-by-14-inch roof vent may have a different visible trim opening.
  2. Use 45192, 45195 or 45196 when a compatible square foam insert is intended. Choose by backing and cover finish, not by colour alone.
  3. For 45197, confirm the longer skylight opening and any dome or frame projection that affects insertion depth.
  4. For hook-and-loop 45191 or vinyl 42913, check the available surface for attaching the shade without blocking required controls.
  5. Remove the insulating accessory when ventilation, emergency operation or access is needed. Check the vent manufacturer's instructions before operating with an insert installed.

Camco insulation and interior shades

Each product card links to the exact catalog manufacturer number for additional information and availability.

For an exterior dome that sits above the vent, see Camco Aero-Flo and standard roof-vent covers. Insulation plugs and shades are fitted from inside and do not replace a weatherproof roof vent lid or dome.

Save on Parts & Accessories

Sign up for special offers, new product updates, and deals on RV, truck camper, towing, truck, and marine parts and accessories.

About NewRVParts

NewRVParts is an online-only source for brand-new RV parts and accessories, truck camper equipment, towing and trailer parts, truck accessories, and marine products. We serve customers throughout Canada and the United States, with products from trusted manufacturers shipped through a large North American distribution network. Shop online for replacement parts, equipment, and accessories delivered directly to your door.

Shop RV Parts