Ancor NMEA 2000 Cables: Power, Backbone, Tees & Drop Cables
Building or extending an NMEA 2000 network requires several different components. Ancor uses colour-coded couplers: red for the power connection, yellow for backbone links and black for device drop cables. Choosing the correct connector type and cable length matters just as much as choosing the correct part number.
Four functions to account for
Power tee · 270000
Connects network power through a red-coded tee. The included power lead is 1 metre long.
Backbone links
Yellow-ended 270001, 270002, 270005 and 270010 connect matching backbone tees across the boat.
Device tees
A single tee (270101) supplies one drop connection; the two-way 270103 connects two device drops without adding a separate backbone segment between their branches.
Drop cable · 270302
Black-coupler cable runs from the tee to the device. It is a different cable type from a backbone extension.
Find the exact cable or fitting
| MPN | Component | Length | What it does |
|---|---|---|---|
| 270000 | Power cable with tee | 1 m (3.3 ft) | Red-coded power tee that introduces network power |
| 270001 | Backbone cable | 0.5 m (1.6 ft) | Short yellow-coupler backbone section |
| 270002 | Backbone cable | 2 m (6.5 ft) | Yellow-coupler backbone section |
| 270005 | Backbone cable | 5 m (16 ft) | Longer yellow-coupler backbone section |
| 270010 | Backbone cable | 10 m (32 ft) | Longest backbone length in this comparison |
| 270101 | Single tee connector | Connector | One tee connection for a device drop |
| 270103 | Two-way tee connector | Connector | Two drop-cable connections from one tee assembly |
| 270302 | Drop cable | 2 m (6.5 ft) | Black-coupler cable between a device and a tee |
Plan the connections before ordering
- Locate the existing backbone and note whether its connectors match the Ancor NMEA 2000 micro connector configuration.
- Measure the length between backbone connection points. Available examples here include 0.5, 2, 5 and 10 metres.
- Count device branches. A single 270101 tee has one device drop connection, while 270103 accommodates two.
- Choose the drop-cable route separately from the backbone route. Part 270302 is a 2-metre drop cable.
- Confirm power injection, appropriate electrical protection and end-of-network termination using the equipment installation manuals.
A normal NMEA 2000 network requires termination at both ends. Ancor specifies male 270106 and female 270105 terminators; the power tee, cables and device tees listed here do not automatically include them. Check the complete installation bill of materials.
Explore the exact Ancor parts
Choose the corresponding part number to review its product information and availability.
Other marine electrical guides
For general marine wire joining and sealing, see the Ancor heat-shrink butt connector guide. NMEA 2000 network fittings and crimp terminals serve different installation purposes.
About NewRVParts
NewRVParts is an online-only source for brand-new RV parts and accessories, truck camper equipment, towing and trailer parts, truck accessories, and marine products. We serve customers throughout Canada and the United States, with products from trusted manufacturers shipped through a large North American distribution network. Shop online for replacement parts, equipment, and accessories delivered directly to your door.
Shop RV Parts