{"title":"Boat Covers","description":"\u003cp\u003eShop \u003cstrong\u003eboat covers\u003c\/strong\u003e for protecting boats during storage, trailering, mooring, and periods between use. Find full boat covers, storage covers, trailerable boat covers, mooring covers, universal and semi-custom covers, support systems, tie-downs, and related cover accessories for a variety of recreational boat styles and sizes.\u003c\/p\u003e\n\n\u003cp\u003eOur selection can include \u003cstrong\u003eboat storage covers, trailerable covers, mooring covers, fishing boat covers, pontoon boat covers, bass boat covers, runabout covers, centre-console boat covers, support poles, tie-down kits, straps, and boat-cover accessories\u003c\/strong\u003e from leading marine accessory manufacturers.\u003c\/p\u003e\n\n\u003ch2\u003eBoat Storage Covers\u003c\/h2\u003e\n\n\u003cp\u003eFind \u003cstrong\u003eboat storage covers\u003c\/strong\u003e designed to help protect compatible boats from dust, dirt, leaves, moisture, UV exposure, and other environmental conditions while the boat is not in use.\u003c\/p\u003e\n\n\u003cp\u003eStorage covers are available in different materials, dimensions, fits, and levels of weather protection. Check whether a particular cover is designed for indoor storage, outdoor storage, or both.\u003c\/p\u003e\n\n\u003ch2\u003eTrailerable Boat Covers\u003c\/h2\u003e\n\n\u003cp\u003eShop \u003cstrong\u003etrailerable boat covers\u003c\/strong\u003e designed for compatible boats while being transported on a trailer. These covers typically incorporate secure attachment points or tie-down systems intended to help keep the cover properly positioned during travel.\u003c\/p\u003e\n\n\u003cp\u003eNot every boat cover is approved for trailering. Always confirm that the manufacturer specifically identifies the cover as trailerable before using it while towing.\u003c\/p\u003e\n\n\u003ch2\u003eBoat Mooring Covers\u003c\/h2\u003e\n\n\u003cp\u003eFind \u003cstrong\u003eboat mooring covers\u003c\/strong\u003e for protecting compatible boats while docked, moored, or stored between trips. Proper coverage can help keep leaves, dirt, rain, and other debris out of the boat's interior.\u003c\/p\u003e\n\n\u003cp\u003eFit, attachment method, water resistance, ventilation, and support requirements vary between cover designs.\u003c\/p\u003e\n\n\u003ch2\u003ePontoon Boat Covers\u003c\/h2\u003e\n\n\u003cp\u003eShop \u003cstrong\u003epontoon boat covers\u003c\/strong\u003e designed for compatible pontoon and deck configurations. Pontoon covers are available for different boat lengths and widths and may include straps, tie-downs, support systems, or other application-specific features.\u003c\/p\u003e\n\n\u003cp\u003eMeasure the boat carefully and account for consoles, rails, seating, and other equipment when comparing cover applications.\u003c\/p\u003e\n\n\u003ch2\u003eFishing, Bass \u0026amp; Runabout Boat Covers\u003c\/h2\u003e\n\n\u003cp\u003eFind covers for \u003cstrong\u003efishing boats, bass boats, runabouts, bowriders, centre-console boats, and other recreational watercraft\u003c\/strong\u003e. Universal and semi-custom designs may cover a range of boats within specified dimensions and configurations.\u003c\/p\u003e\n\n\u003cp\u003eFor the best fit, compare the manufacturer's specified boat length, beam width, hull style, windshield or console configuration, and other fitment requirements.\u003c\/p\u003e\n\n\u003ch2\u003eUniversal \u0026amp; Semi-Custom Boat Covers\u003c\/h2\u003e\n\n\u003cp\u003eShop \u003cstrong\u003euniversal and semi-custom boat covers\u003c\/strong\u003e designed to fit boats within specified size and shape ranges. These covers can provide a practical solution when a model-specific cover is not required or available.\u003c\/p\u003e\n\n\u003cp\u003eAlways use the manufacturer's measurement instructions rather than selecting a cover based only on the advertised boat length.\u003c\/p\u003e\n\n\u003ch2\u003eBoat Cover Support Poles \u0026amp; Systems\u003c\/h2\u003e\n\n\u003cp\u003eFind \u003cstrong\u003eboat cover support poles and support systems\u003c\/strong\u003e designed to help maintain the shape of compatible covers and reduce low areas where rainwater or debris may collect.\u003c\/p\u003e\n\n\u003cp\u003eSupport requirements vary according to the cover and boat design. Use support components that are compatible with the cover material and installation method.\u003c\/p\u003e\n\n\u003ch2\u003eBoat Cover Straps, Tie-Downs \u0026amp; Accessories\u003c\/h2\u003e\n\n\u003cp\u003eOur selection may also include \u003cstrong\u003eboat cover straps, tie-down kits, buckles, support components, replacement hardware, and cover accessories\u003c\/strong\u003e. These products can help replace damaged components or complete a compatible boat-cover installation.\u003c\/p\u003e\n\n\u003cp\u003eFor replacement parts, match the cover manufacturer, model, dimensions, attachment system, and original component whenever possible.\u003c\/p\u003e\n\n\u003ch2\u003eBoat Protection for Storage \u0026amp; Travel\u003c\/h2\u003e\n\n\u003cp\u003eA properly fitted boat cover can help protect seating, flooring, consoles, controls, and other exposed areas when the boat is stored or transported. The correct cover depends on the \u003cstrong\u003eboat type, dimensions, storage environment, and whether the cover will be used during trailering\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eBrowse our \u003ca href=\"https:\/\/newrvparts.com\/collections\/marine-parts-accessories-boat\" aria-label=\"Shop new marine parts and boat accessories\"\u003eNew Marine Parts \u0026amp; Accessories\u003c\/a\u003e collection for additional boat and marine equipment.\u003c\/p\u003e\n\n\u003ch2\u003eFast Shipping Across Canada \u0026amp; the U.S.\u003c\/h2\u003e\n\n\u003cp\u003eOur new RV and marine parts are sourced through \u003cstrong\u003eNorth America's largest RV parts and accessories distribution network\u003c\/strong\u003e, with numerous warehouse locations throughout \u003cstrong\u003eCanada and the United States\u003c\/strong\u003e. Orders ship from the nearest available warehouse whenever possible, helping provide \u003cstrong\u003efast and efficient shipping across Canada and the U.S.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis extensive warehouse network provides access to boat covers, marine accessories, storage and protection products, and thousands of other brand-new RV and marine products.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Right Boat Cover\u003c\/h2\u003e\n\n\u003cp\u003eBefore ordering, verify the \u003cstrong\u003eboat length, beam width, hull style, windshield or console configuration, cover dimensions, material, attachment system, intended storage conditions, and manufacturer fitment information\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eIf the cover will be used while towing, confirm that it is specifically \u003cstrong\u003erated or approved for trailering\u003c\/strong\u003e. A storage-only or mooring cover should not be assumed suitable for highway use.\u003c\/p\u003e\n\n\u003cp\u003eFor additional marine, RV, and outdoor equipment, browse our complete \u003ca href=\"https:\/\/newrvparts.com\/collections\/rv-parts\" aria-label=\"Shop all new RV parts and accessories\"\u003eNew RV Parts\u003c\/a\u003e catalog.\u003c\/p\u003e\n","products":[{"product_id":"carver-side-console-boat-cover-16-1-ft-x-82-in-103500a-16","title":"Carver 103500A-16 Toast Acrylic Cover - 2019-2020 Boston Whaler 160 Super Sport","description":"\u003cp\u003eFit a model-specific boat cover to a \u003cstrong\u003e2019–2020 Boston Whaler 160 Super Sport\u003c\/strong\u003e with the corresponding full bow-rail and ski-tow configuration. \u003cstrong\u003eCarver 103500A-16\u003c\/strong\u003e is the premium marine-acrylic version in \u003cstrong\u003eToast\u003c\/strong\u003e, not a generic grey polyester side-console cover.\u003c\/p\u003e\u003ch2\u003eApplication and fabric\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e103500A-16\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eApplication: specified 2019–2020 Boston Whaler 160 Super Sport configuration with full bow rail and ski tow\u003c\/li\u003e\n\u003cli\u003eReference boat centreline length: \u003cstrong\u003e16 ft 2 in\u003c\/strong\u003e; beam: \u003cstrong\u003e6 ft 10 in (82 in)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFabric: premium solution-dyed Sunbrella or Outdura marine acrylic, as supplied for the model\u003c\/li\u003e\n\u003cli\u003eCarver colour code -16: \u003cstrong\u003eToast\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eWater-repellent, breathable fabric with resistance to UV exposure and mildew\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eConfirm the boat configuration\u003c\/h2\u003e\u003cp\u003eCheck the boat's model year, bow-rail arrangement, ski-tow installation and any added top or tower before ordering. A 160 Super Sport with a split rail, different tow configuration or other accessories may require another Carver cover pattern. Boat length alone does not establish compatibility; confirm later model years separately.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378008731854,"sku":"02-0209","price":561.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_21b0ad8d-c408-4208-b222-78ce4e4a5c60.jpg?v=1789844047"},{"product_id":"carver-boat-cover-support-pole-with-boat-vent-ii-60002","title":"Carver 60002 Boat Cover Support Pole with Boat Vent II - Adjustable 22–70 in","description":"\u003cp\u003eSupport a stored boat cover and help release trapped moisture with the \u003cstrong\u003eCarver 60002 telescoping pole and Boat Vent II\u003c\/strong\u003e. The lightweight aluminum support adjusts from 22 to 70 inches, creating a raised point in the cover so rain can shed rather than collecting in a low spot.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 60002\u003c\/li\u003e\n\u003cli\u003eAdjustable aluminum support pole: 22–70 in\u003c\/li\u003e\n\u003cli\u003eIncludes Boat Vent II fitting at the upper end\u003c\/li\u003e\n\u003cli\u003eSilver aluminum pole, one assembly\u003c\/li\u003e\n\u003cli\u003eVentilation helps reduce moisture accumulation beneath the cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eUse and installation\u003c\/h2\u003e\u003cp\u003eCheck that the cover and its vent fitting are compatible with this style of support. Position the pole so the fabric slopes away from the raised area, without excessive point pressure. This is for \u003cstrong\u003estationary boat-cover support\u003c\/strong\u003e and should be removed before towing or operating the boat. Carver 60000 is the separate standard support-pole version without Boat Vent II.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378008764622,"sku":"27-9439","price":77.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_e07aad6d-40dd-4787-830c-958ec15a2adc.jpg?v=1789844053"},{"product_id":"carver-outboard-motor-cover-5-hp-70000f-10","title":"Carver 70000F-10 Poly-Flex II Outboard Motor Cover - 5 HP, Slate Gray","description":"\u003cp\u003eKeep the cowling on a small outboard protected between trips with the \u003cstrong\u003eCarver 70000F-10\u003c\/strong\u003e. This lightweight Slate Gray Poly-Flex II cover is designed for the \u003cstrong\u003e5 HP motor class\u003c\/strong\u003e, with a drawcord hem for a snug fit during storage.\u003c\/p\u003e\u003ch2\u003eSize and material\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 70000F-10\u003c\/li\u003e\n\u003cli\u003eCarver motor-cover size category: 5 HP\u003c\/li\u003e\n\u003cli\u003eCover dimensions: \u003cstrong\u003e18 in long × 10 in high × 12 in wide\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFabric: Poly-Flex II, solution-dyed marine polyester\u003c\/li\u003e\n\u003cli\u003eColour: Slate Gray\u003c\/li\u003e\n\u003cli\u003eWater-repellent, breathable material with UV and mildew resistance\u003c\/li\u003e\n\u003cli\u003eOne outboard cowling cover with a drawcord hem\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFit check\u003c\/h2\u003e\u003cp\u003eMeasure the complete engine cowling, including protruding fittings; horsepower alone does not guarantee a fit. This is a fabric cover for the motor housing, not the lower unit or a replacement engine cowl. Remove it before starting the motor.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378009223374,"sku":"07-4265","price":27.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_ae296e6d-2c9b-41b9-a12d-f7f6ff6682cc.jpg?v=1789844112"},{"product_id":"carver-outboard-motor-cover-10-hp-70001f-10","title":"Carver 70001F-10 Poly-Flex II Universal Outboard Motor Cover - 10–35 HP, Slate Gray","description":"\u003cp\u003eCover a compatible outboard motor cowling while the boat is stored with the \u003cstrong\u003eCarver 70001F-10\u003c\/strong\u003e. Its \u003cstrong\u003eSlate Gray Poly-Flex II\u003c\/strong\u003e solution-dyed marine polyester fabric helps shield the engine exterior from sunlight, dirt and weather.\u003c\/p\u003e\u003ch2\u003eMotor fit and cover dimensions\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 70001F-10\u003c\/li\u003e\n\u003cli\u003eCarver motor-size category: \u003cstrong\u003e10–35 HP\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCover size: \u003cstrong\u003e20 in long × 20 in high × 14 in wide\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFabric: \u003cstrong\u003ePoly-Flex II\u003c\/strong\u003e breathable, water-repellent marine polyester\u003c\/li\u003e\n\u003cli\u003eColour: Slate Gray\u003c\/li\u003e\n\u003cli\u003eDraw rope sewn into the hem for fastening\u003c\/li\u003e\n\u003cli\u003eQuantity: one universal outboard motor cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eHorsepower alone does not guarantee compatibility. Measure your motor cowling's full length, height and width, including projecting parts, and compare those measurements with the cover. This is a removable fabric storage cover, not a replacement engine cowling. Do not run the motor with the cover installed.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378009288910,"sku":"07-4250","price":27.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_5ae2ff62-6620-4c84-bafe-791d6df940d7.jpg?v=1789844119"},{"product_id":"carver-outboard-motor-cover-10-hp-70001s-11","title":"Carver 70001S-11 Sun-DURA Universal Outboard Motor Cover - 10–35 HP, Mist Gray","description":"\u003cp\u003eCover a compatible outboard motor cowling while the boat is stored with the \u003cstrong\u003eCarver 70001S-11\u003c\/strong\u003e. Its \u003cstrong\u003eMist Gray Sun-DURA\u003c\/strong\u003e solution-dyed marine polyester fabric helps shield the engine exterior from sunlight, dirt and weather.\u003c\/p\u003e\u003ch2\u003eMotor fit and cover dimensions\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 70001S-11\u003c\/li\u003e\n\u003cli\u003eCarver motor-size category: \u003cstrong\u003e10–35 HP\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCover size: \u003cstrong\u003e20 in long × 20 in high × 14 in wide\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFabric: \u003cstrong\u003eSun-DURA\u003c\/strong\u003e breathable, water-repellent marine polyester\u003c\/li\u003e\n\u003cli\u003eColour: Mist Gray\u003c\/li\u003e\n\u003cli\u003eDraw rope sewn into the hem for fastening\u003c\/li\u003e\n\u003cli\u003eQuantity: one universal outboard motor cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eHorsepower alone does not guarantee compatibility. Measure your motor cowling's full length, height and width, including projecting parts, and compare those measurements with the cover. This is a removable fabric storage cover, not a replacement engine cowling. Do not run the motor with the cover installed.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378009321678,"sku":"05-4248","price":30.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_32ce756b-928a-48ec-b239-66ef49c86406.jpg?v=1789844125"},{"product_id":"carver-outboard-motor-cover-40-hp-70002f-10","title":"Carver 70002F-10 Poly-Flex II Universal Outboard Motor Cover - 40–70 HP, Slate Gray","description":"\u003cp\u003eCover a compatible outboard motor cowling while the boat is stored with the \u003cstrong\u003eCarver 70002F-10\u003c\/strong\u003e. Its \u003cstrong\u003eSlate Gray Poly-Flex II\u003c\/strong\u003e solution-dyed marine polyester fabric helps shield the engine exterior from sunlight, dirt and weather.\u003c\/p\u003e\u003ch2\u003eMotor fit and cover dimensions\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 70002F-10\u003c\/li\u003e\n\u003cli\u003eCarver motor-size category: \u003cstrong\u003e40–70 HP\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCover size: \u003cstrong\u003e25 in long × 18 in high × 15 in wide\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFabric: \u003cstrong\u003ePoly-Flex II\u003c\/strong\u003e breathable, water-repellent marine polyester\u003c\/li\u003e\n\u003cli\u003eColour: Slate Gray\u003c\/li\u003e\n\u003cli\u003eDraw rope sewn into the hem for fastening\u003c\/li\u003e\n\u003cli\u003eQuantity: one universal outboard motor cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eHorsepower alone does not guarantee compatibility. Measure your motor cowling's full length, height and width, including projecting parts, and compare those measurements with the cover. This is a removable fabric storage cover, not a replacement engine cowling. Do not run the motor with the cover installed.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378009354446,"sku":"07-5543","price":36.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_b858b710-d86c-4abb-8dfd-49830bf6dd67.jpg?v=1789844132"},{"product_id":"carver-outboard-motor-cover-40-hp-70002s-11","title":"Carver 70002S-11 Sun-DURA Universal Outboard Motor Cover - 40–70 HP, Mist Gray","description":"\u003cp\u003eCover a compatible outboard motor cowling while the boat is stored with the \u003cstrong\u003eCarver 70002S-11\u003c\/strong\u003e. Its \u003cstrong\u003eMist Gray Sun-DURA\u003c\/strong\u003e solution-dyed marine polyester fabric helps shield the engine exterior from sunlight, dirt and weather.\u003c\/p\u003e\u003ch2\u003eMotor fit and cover dimensions\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 70002S-11\u003c\/li\u003e\n\u003cli\u003eCarver motor-size category: \u003cstrong\u003e40–70 HP\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCover size: \u003cstrong\u003e25 in long × 18 in high × 15 in wide\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFabric: \u003cstrong\u003eSun-DURA\u003c\/strong\u003e breathable, water-repellent marine polyester\u003c\/li\u003e\n\u003cli\u003eColour: Mist Gray\u003c\/li\u003e\n\u003cli\u003eDraw rope sewn into the hem for fastening\u003c\/li\u003e\n\u003cli\u003eQuantity: one universal outboard motor cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eHorsepower alone does not guarantee compatibility. Measure your motor cowling's full length, height and width, including projecting parts, and compare those measurements with the cover. This is a removable fabric storage cover, not a replacement engine cowling. Do not run the motor with the cover installed.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378009387214,"sku":"05-4190","price":30.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_de4e5139-5c64-4703-a9d5-a430d22e554d.jpg?v=1790477186"},{"product_id":"carver-outboard-motor-cover-100-hp-70003f-10","title":"Carver 70003F-10 Poly-Flex II Universal Outboard Motor Cover - 100 HP, Slate Gray","description":"\u003cp\u003eCover a compatible outboard motor cowling while the boat is stored with the \u003cstrong\u003eCarver 70003F-10\u003c\/strong\u003e. Its \u003cstrong\u003eSlate Gray Poly-Flex II\u003c\/strong\u003e solution-dyed marine polyester fabric helps shield the engine exterior from sunlight, dirt and weather.\u003c\/p\u003e\u003ch2\u003eMotor fit and cover dimensions\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 70003F-10\u003c\/li\u003e\n\u003cli\u003eCarver motor-size category: \u003cstrong\u003e100 HP\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCover size: \u003cstrong\u003e25 in long × 26 in high × 19 in wide\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFabric: \u003cstrong\u003ePoly-Flex II\u003c\/strong\u003e breathable, water-repellent marine polyester\u003c\/li\u003e\n\u003cli\u003eColour: Slate Gray\u003c\/li\u003e\n\u003cli\u003eDraw rope sewn into the hem for fastening\u003c\/li\u003e\n\u003cli\u003eQuantity: one universal outboard motor cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eHorsepower alone does not guarantee compatibility. Measure your motor cowling's full length, height and width, including projecting parts, and compare those measurements with the cover. This is a removable fabric storage cover, not a replacement engine cowling. Do not run the motor with the cover installed.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378009419982,"sku":"07-2600","price":27.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_16479d87-da99-479f-82af-65c48b0ed6ba.jpg?v=1789844145"},{"product_id":"carver-outboard-motor-cover-100-hp-70003s-11","title":"Carver 70003S-11 Sun-DURA Universal Outboard Motor Cover - 100 HP, Mist Gray","description":"\u003cp\u003eCover a compatible outboard motor cowling while the boat is stored with the \u003cstrong\u003eCarver 70003S-11\u003c\/strong\u003e. Its \u003cstrong\u003eMist Gray Sun-DURA\u003c\/strong\u003e solution-dyed marine polyester fabric helps shield the engine exterior from sunlight, dirt and weather.\u003c\/p\u003e\u003ch2\u003eMotor fit and cover dimensions\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 70003S-11\u003c\/li\u003e\n\u003cli\u003eCarver motor-size category: \u003cstrong\u003e100 HP\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCover size: \u003cstrong\u003e25 in long × 26 in high × 19 in wide\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFabric: \u003cstrong\u003eSun-DURA\u003c\/strong\u003e breathable, water-repellent marine polyester\u003c\/li\u003e\n\u003cli\u003eColour: Mist Gray\u003c\/li\u003e\n\u003cli\u003eDraw rope sewn into the hem for fastening\u003c\/li\u003e\n\u003cli\u003eQuantity: one universal outboard motor cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eHorsepower alone does not guarantee compatibility. Measure your motor cowling's full length, height and width, including projecting parts, and compare those measurements with the cover. This is a removable fabric storage cover, not a replacement engine cowling. Do not run the motor with the cover installed.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378009452750,"sku":"05-4145","price":29.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_b41c7c4d-e180-4e5d-be49-a7bb58a70a78.jpg?v=1789844152"},{"product_id":"carver-outboard-motor-cover-150-hp-70005s-11","title":"Carver 70005S-11 Sun-DURA Outboard Motor Cover - 150 HP, Mist Gray","description":"\u003cp\u003eProtect an outboard motor cowling while the boat is parked with the \u003cstrong\u003eCarver 70005S-11\u003c\/strong\u003e universal motor cover. Its Mist Gray \u003cstrong\u003eSun-DURA\u003c\/strong\u003e solution-dyed marine polyester fabric helps shield against sun, dust and moisture while allowing trapped dampness to escape.\u003c\/p\u003e\u003ch2\u003eSize and material\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 70005S-11\u003c\/li\u003e\n\u003cli\u003eCarver motor class: \u003cstrong\u003e150 HP\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCover dimensions: \u003cstrong\u003e31 in long × 29 in high × 18 in wide\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Sun-DURA breathable, water-repellent marine polyester\u003c\/li\u003e\n\u003cli\u003eColour: Mist Gray\u003c\/li\u003e\n\u003cli\u003eDraw rope sewn into the hem to secure the cover\u003c\/li\u003e\n\u003cli\u003eOne fabric outboard motor cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eMotor horsepower is only a general size category. Measure the complete cowling and any projections, then compare its length, height and width with the listed dimensions. Remove the cover before running the engine. This is not a replacement rigid engine cowling.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378009485518,"sku":"05-4221","price":69.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_e60c8c18-c4e6-4691-8494-3009493a0004.jpg?v=1789844159"},{"product_id":"carver-outboard-motor-cover-150-hp-70005s-14","title":"Carver 70005S-14 Sun-DURA Outboard Motor Cover - 150 HP, Cobalt Blue","description":"\u003cp\u003eKeep a larger outboard cowling protected from sun, dirt and weather while your boat is parked with the \u003cstrong\u003eCarver 70005S-14\u003c\/strong\u003e. Its Cobalt Blue Sun-DURA fabric is a durable, breathable marine polyester sized for Carver's \u003cstrong\u003e150 HP motor category\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 70005S-14\u003c\/li\u003e\n\u003cli\u003eMotor-size category: 150 HP\u003c\/li\u003e\n\u003cli\u003eCover dimensions: \u003cstrong\u003e31 in long × 29 in high × 18 in wide\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFabric: Sun-DURA, solution-dyed marine polyester\u003c\/li\u003e\n\u003cli\u003eColour: Cobalt Blue\u003c\/li\u003e\n\u003cli\u003eWater-repellent finish with UV and mildew resistance\u003c\/li\u003e\n\u003cli\u003eDrawcord in the hem; one fabric cowling cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eCheck the motor's actual housing length, height and width rather than relying on its horsepower label. This cover fits over the outboard's upper cowling, not its lower leg, and should be removed before engine operation.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378009518286,"sku":"27-9458","price":29.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_98aeceb9-408d-4b4b-838f-23dd9f754f8d.jpg?v=1790477256"},{"product_id":"carver-outboard-motor-cover-250-hp-70006s-11","title":"Carver 70006S-11 Sun-DURA Outboard Motor Cover - 200–250 HP, Mist Gray","description":"\u003cp\u003eProtect an outboard motor cowling while the boat is parked with the \u003cstrong\u003eCarver 70006S-11\u003c\/strong\u003e universal motor cover. Its Mist Gray \u003cstrong\u003eSun-DURA\u003c\/strong\u003e solution-dyed marine polyester fabric helps shield against sun, dust and moisture while allowing trapped dampness to escape.\u003c\/p\u003e\u003ch2\u003eSize and material\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 70006S-11\u003c\/li\u003e\n\u003cli\u003eCarver motor class: \u003cstrong\u003e200–250 HP\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCover dimensions: \u003cstrong\u003e30 in long × 40 in high × 24 in wide\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Sun-DURA breathable, water-repellent marine polyester\u003c\/li\u003e\n\u003cli\u003eColour: Mist Gray\u003c\/li\u003e\n\u003cli\u003eDraw rope sewn into the hem to secure the cover\u003c\/li\u003e\n\u003cli\u003eOne fabric outboard motor cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eMotor horsepower is only a general size category. Measure the complete cowling and any projections, then compare its length, height and width with the listed dimensions. Remove the cover before running the engine. This is not a replacement rigid engine cowling.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378009551054,"sku":"05-4155","price":44.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_78035d60-5fe6-4e93-92fe-d6e8530c86a0.jpg?v=1790477244"},{"product_id":"carver-outboard-motor-cover-350-hp-70007p-10","title":"Carver 70007P-10 Performance Poly-Guard Outboard Cover - 350 HP, Haze Gray","description":"\u003cp\u003eProtect a large outboard cowling during storage with the \u003cstrong\u003eCarver 70007P-10\u003c\/strong\u003e. This Performance Poly-Guard cover in Haze Gray is designed for the 350 HP motor-size category and helps shield the motor housing from sunlight, dirt and moisture.\u003c\/p\u003e\u003ch2\u003ePart details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 70007P-10\u003c\/li\u003e\n\u003cli\u003eMotor category: 350 HP; verify the actual cowling measurements\u003c\/li\u003e\n\u003cli\u003eCover dimensions: 41 in long × 40 in high × 26 in wide\u003c\/li\u003e\n\u003cli\u003eFabric: Performance Poly-Guard marine polyester\u003c\/li\u003e\n\u003cli\u003eColour: Haze Gray\u003c\/li\u003e\n\u003cli\u003eOne removable outboard cowling cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFit and use\u003c\/h2\u003e\u003cp\u003eMeasure the motor's length, height and width, including projecting fittings. Horsepower is a general size guide, not guaranteed model fitment. This fabric cover is not a replacement rigid cowling or a lower-unit cover. Remove before running the motor.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378009583822,"sku":"27-9460","price":15.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_613bf903-5645-4dac-a6cf-16af8b6b4926.jpg?v=1790477217"},{"product_id":"carver-outboard-motor-cover-350-hp-70007s-11","title":"Carver 70007S-11 Sun-DURA Outboard Motor Cover - 350 HP, Mist Gray","description":"\u003cp\u003eProtect an outboard motor cowling while the boat is parked with the \u003cstrong\u003eCarver 70007S-11\u003c\/strong\u003e universal motor cover. Its Mist Gray \u003cstrong\u003eSun-DURA\u003c\/strong\u003e solution-dyed marine polyester fabric helps shield against sun, dust and moisture while allowing trapped dampness to escape.\u003c\/p\u003e\u003ch2\u003eSize and material\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 70007S-11\u003c\/li\u003e\n\u003cli\u003eCarver motor class: \u003cstrong\u003e350 HP\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCover dimensions: \u003cstrong\u003e41 in long × 40 in high × 26 in wide\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Sun-DURA breathable, water-repellent marine polyester\u003c\/li\u003e\n\u003cli\u003eColour: Mist Gray\u003c\/li\u003e\n\u003cli\u003eDraw rope sewn into the hem to secure the cover\u003c\/li\u003e\n\u003cli\u003eOne fabric outboard motor cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eMotor horsepower is only a general size category. Measure the complete cowling and any projections, then compare its length, height and width with the listed dimensions. Remove the cover before running the engine. This is not a replacement rigid engine cowling.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378009616590,"sku":"05-4218","price":80.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_35c99079-73c7-45e0-a186-ee8e88bd9325.jpg?v=1789844186"},{"product_id":"carver-outboard-motor-cover-25-hp-70009f-10","title":"Carver 70009F-10 Poly-Flex II Outboard Motor Cover - 25 HP, Slate Gray","description":"\u003cp\u003eProtect an outboard motor cowling while the boat is parked with the \u003cstrong\u003eCarver 70009F-10\u003c\/strong\u003e universal motor cover. Its Slate Gray \u003cstrong\u003ePoly-Flex II\u003c\/strong\u003e solution-dyed marine polyester fabric helps shield against sun, dust and moisture while allowing trapped dampness to escape.\u003c\/p\u003e\u003ch2\u003eSize and material\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 70009F-10\u003c\/li\u003e\n\u003cli\u003eCarver motor class: \u003cstrong\u003e25 HP\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCover dimensions: \u003cstrong\u003e26 in long × 18 in high × 15 in wide\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Poly-Flex II breathable, water-repellent marine polyester\u003c\/li\u003e\n\u003cli\u003eColour: Slate Gray\u003c\/li\u003e\n\u003cli\u003eDraw rope sewn into the hem to secure the cover\u003c\/li\u003e\n\u003cli\u003eOne fabric outboard motor cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eMotor horsepower is only a general size category. Measure the complete cowling and any projections, then compare its length, height and width with the listed dimensions. Remove the cover before running the engine. This is not a replacement rigid engine cowling.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378009649358,"sku":"07-6116","price":21.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_0f956c0b-54d4-42ed-b7ca-59d504ea042a.jpg?v=1789844193"},{"product_id":"carver-outboard-motor-cover-25-hp-70009s-11","title":"Carver 70009S-11 Sun-DURA Outboard Motor Cover - 25 HP, 26 x 18 x 15 in, Mist Gray","description":"\u003cp\u003eProtect the cowling of a compatible 25 HP outboard motor during storage with the \u003cstrong\u003eCarver 70009S-11\u003c\/strong\u003e. This Mist Gray Sun-DURA cover is made from breathable, water-repellent marine polyester with a draw rope sewn into the hem for a snug fit.\u003c\/p\u003e\u003ch2\u003eManufacturer size specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e70009S-11\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotor-cover category: \u003cstrong\u003e25 HP\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCover dimensions: \u003cstrong\u003e26 inches long × 18 inches high × 15 inches wide\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFabric: \u003cstrong\u003eSun-DURA\u003c\/strong\u003e, 7.6 oz solution-dyed marine polyester, Mist Gray\u003c\/li\u003e\n\u003cli\u003eWater-repellent finish with UV and mildew resistance\u003c\/li\u003e\n\u003cli\u003eDraw rope at hem; one fabric outboard cowling cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCheck your motor before ordering\u003c\/h2\u003e\u003cp\u003eMeasure the complete cowling, including projecting fittings; horsepower is a size category rather than guaranteed engine-model fitment. This is not the 200–250 HP Carver 70006 series, which uses a larger 30 × 40 × 24-inch cover. Remove this storage cover before operating the engine.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378009682126,"sku":"05-4234","price":26.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_669ba386-e55e-4372-9ffb-687f064954d9.jpg?v=1789844199"},{"product_id":"carver-v-hull-center-console-boat-cover-17-ft-5-in-x-92-in-70017s-11","title":"Carver 70017S-11 Sun-DURA Center Console Boat Cover - 17 ft 6 in, 92 in Beam","description":"\u003cp\u003eKeep a smaller centre-console fishing boat covered between trips with \u003cstrong\u003eCarver 70017S-11\u003c\/strong\u003e. This Mist Gray Sun-DURA Styled-to-Fit cover follows Carver's CCF-17 profile for compatible V-hull centre-console boats with an outboard, providing protection over the console and cockpit.\u003c\/p\u003e\u003ch2\u003eVerified dimensions and design\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e70017S-11\u003c\/strong\u003e; CCF-17 centre-console pattern\u003c\/li\u003e\n\u003cli\u003eBoat centreline length: \u003cstrong\u003e17 ft 6 in\u003c\/strong\u003e (not 17 ft 5 in)\u003c\/li\u003e\n\u003cli\u003eMaximum beam: \u003cstrong\u003e92 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard centre-console height allowance: up to \u003cstrong\u003e54 in\u003c\/strong\u003e above the deck\u003c\/li\u003e\n\u003cli\u003eMist Gray \u003cstrong\u003eSun-DURA\u003c\/strong\u003e solution-dyed marine polyester, breathable and water-repellent\u003c\/li\u003e\n\u003cli\u003eFor compatible centre-console fishing boats with an outboard\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eMeasure the boat's centreline, maximum beam, console height and raised hardware, including any outboard extension. The boat-style pattern is not a guaranteed match to every make and model of the same dimensions. Confirm the cover's fastening and support requirements before storage or transport.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378009714894,"sku":"05-4154","price":527.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_2d75499d-8374-4507-8283-5df9d771d16b.jpg?v=1789844206"},{"product_id":"carver-center-console-boat-cover-18-5-ft-x-94-in-71018f-10","title":"Carver 71018F-10 Poly-Flex II Center Console Boat Cover - 18 ft 6 in, 94 in Beam","description":"\u003cp\u003eKeep an 18 ft 6 in centre-console fishing boat protected during storage with the \u003cstrong\u003eCarver 71018F-10 Styled-to-Fit cover\u003c\/strong\u003e. Its Slate Gray Poly-Flex II marine polyester is patterned for a bay-style centre-console boat with an outboard, rather than a universal fit for every hull of similar length.\u003c\/p\u003e\u003ch2\u003eFit and specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 71018F-10; Carver cover pattern 71018F\u003c\/li\u003e\n\u003cli\u003eBoat centreline length: \u003cstrong\u003e18 ft 6 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum beam width: \u003cstrong\u003e94 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBoat style: bay\/centre-console fishing boat with outboard\u003c\/li\u003e\n\u003cli\u003eMaterial: Slate Gray Poly-Flex II solution-dyed marine polyester\u003c\/li\u003e\n\u003cli\u003eWater-repellent, UV- and mildew-resistant breathable cover fabric\u003c\/li\u003e\n\u003cli\u003eSecuring straps and buckles for a suitable installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eMeasure centreline length and beam and compare the console, rail and outboard configuration with the manufacturer's cover pattern. The dimensions are not a guarantee of fit for every 18.5-foot boat. Follow the tie-down instructions for storage or trailering.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378009747662,"sku":"05-4220","price":181.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_584eb043-d0c1-4d69-890b-274d5fb95210.jpg?v=1789844213"},{"product_id":"carver-v-hull-bass-boat-cover-18-5-ft-x-102-in-71218p-10","title":"Carver 71218P-10 Poly-Guard Shallow-Draft Center Console Boat Cover - 18 ft 6 in, 102 in Beam","description":"\u003cp\u003eProtect a shallow-draft center-console fishing boat with the \u003cstrong\u003eCarver 71218P-10 Styled-to-Fit cover\u003c\/strong\u003e. This SKIFF-18 pattern is designed for compatible V-hull and bay-style fishing boats with an outboard, rather than conventional bass boats. Its Haze Gray Performance Poly-Guard fabric provides durable, breathable storage protection.\u003c\/p\u003e\u003ch2\u003eFit and material\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e71218P-10\u003c\/strong\u003e; SKIFF-18 pattern\u003c\/li\u003e\n\u003cli\u003eBoat centerline length: \u003cstrong\u003e18 ft 6 in\u003c\/strong\u003e; maximum beam: \u003cstrong\u003e102 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor shallow-draft center-console V-hull fishing boats with outboard power\u003c\/li\u003e\n\u003cli\u003eAllows for a center console up to \u003cstrong\u003e60 in\u003c\/strong\u003e above the deck and a bow-mounted trolling motor\u003c\/li\u003e\n\u003cli\u003eAttached outboard motor-cover section\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance Poly-Guard\u003c\/strong\u003e: 8 oz marine-grade polyester in Haze Gray\u003c\/li\u003e\n\u003cli\u003eWater-repellent, breathable fabric with UV and mildew resistance; reinforced tie-down loops and securing kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eMeasure the actual boat centerline and widest beam, along with console height, trolling-motor equipment and the outboard arrangement. This is a hull-style pattern, not guaranteed make\/model\/year fitment. Secure and support the cover according to its installation instructions.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378009813198,"sku":"27-9471","price":358.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_b255a0d2-f390-41ef-97a8-b1f529c07751.jpg?v=1789844220"},{"product_id":"carver-v-hull-bass-boat-cover-18-ft-6-in-x-102-in-71218s-11","title":"Carver 71218S-11 Sun-DURA Centre-Console Shallow-Draft Boat Cover - 18 ft 6 in, 102 in Beam","description":"\u003cp\u003eProtect a shallow-draft centre-console fishing boat with the \u003cstrong\u003eCarver 71218S-11 Styled-to-Fit cover\u003c\/strong\u003e. Its SKIFF-18 pattern follows the shape of compatible V-hull and bay-style fishing boats with a single outboard, rather than a low-profile bass boat. The Mist Gray Sun-DURA fabric helps keep sun, rain and storage debris away from the console and deck.\u003c\/p\u003e\u003ch2\u003eFit and construction\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: \u003cstrong\u003e71218S-11\u003c\/strong\u003e; SKIFF-18 pattern\u003c\/li\u003e\n\u003cli\u003eBoat centreline: \u003cstrong\u003e18 ft 6 in\u003c\/strong\u003e; maximum beam: \u003cstrong\u003e102 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor shallow-draft V-hull \/ bay-style centre-console fishing boats with outboard power\u003c\/li\u003e\n\u003cli\u003eConsole-height allowance: up to \u003cstrong\u003e60 in\u003c\/strong\u003e above the deck\u003c\/li\u003e\n\u003cli\u003ePattern includes allowance for a bow-mounted trolling motor and an attached outboard-motor cover\u003c\/li\u003e\n\u003cli\u003eMist Gray Sun-DURA, 7.6 oz solution-dyed marine polyester with a breathable, water-repellent finish\u003c\/li\u003e\n\u003cli\u003eBoat-cover tie-down kit included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCheck the hull before ordering\u003c\/h2\u003e\u003cp\u003eMeasure the complete centreline and beam, then check the console height, bow equipment and outboard arrangement. These measurements describe a boat-style pattern, not a guaranteed make\/model\/year fit. Secure the cover following its installation instructions and provide appropriate support for outdoor storage.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378009845966,"sku":"05-4147","price":661.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_769818a0-5f9f-47dd-87e1-6a6094424315.jpg?v=1789844227"},{"product_id":"carver-v-hull-bass-boat-cover-22-5-ft-x-102-in-71222s-11","title":"Carver 71222S-11 Sun-DURA Shallow-Draft Centre-Console Boat Cover - 22 ft 6 in, 102 in Beam","description":"\u003cp\u003eGive a larger bay-style centre-console boat a protective cover between trips with \u003cstrong\u003eCarver 71222S-11\u003c\/strong\u003e. The SKIFF-22 pattern is shaped for a shallow-draft V-hull fishing boat, with allowances for its console, bow-mounted trolling motor and outboard. Its Mist Gray Sun-DURA fabric is breathable and water-repellent.\u003c\/p\u003e\u003ch2\u003eCorrect application\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e71222S-11\u003c\/strong\u003e; SKIFF-22 design\u003c\/li\u003e\n\u003cli\u003eBoat centreline length: \u003cstrong\u003e22 ft 6 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum beam width: \u003cstrong\u003e102 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor bay-style or V-hull shallow-draft centre-console fishing boats\u003c\/li\u003e\n\u003cli\u003eMaximum console height allowance: \u003cstrong\u003e60 in\u003c\/strong\u003e above the deck\u003c\/li\u003e\n\u003cli\u003eAccommodates a bow-mounted trolling motor; attached cover section for the outboard\u003c\/li\u003e\n\u003cli\u003eMist Gray Sun-DURA solution-dyed 7.6 oz marine polyester\u003c\/li\u003e\n\u003cli\u003eIncludes tie-down kit; additional securing straps recommended for boats over 20 ft\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMeasuring and installation\u003c\/h2\u003e\u003cp\u003eCheck the complete hull length, widest beam, actual console height and raised fishing equipment before choosing the cover. The shorter 71218S-11 is a different size. Match the hull profile carefully and support and tie down the cover as directed for storage or transport.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378009878734,"sku":"05-4203","price":459.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_57fc020b-2862-4cef-a445-87bbead6e684.jpg?v=1790477353"},{"product_id":"carver-v-hull-runabout-boat-cover-18-5-ft-x-96-in-77018f-10","title":"Carver 77018F-10 Poly-Flex II Outboard V-Hull Runabout Cover - 18 ft 6 in, 96 in Beam","description":"\u003cp\u003eKeep the seats, cockpit and outboard protected while your runabout is stored with the \u003cstrong\u003eCarver 77018F-10\u003c\/strong\u003e. The Slate Gray Poly-Flex II cover is shaped for an 18 ft 6 in V-hull runabout with a windshield and hand or bow rails. Its integrated outboard-motor cover is part of the design, so it differs from the similarly sized 77118 I\/O series.\u003c\/p\u003e\u003ch2\u003eFit and fabric\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e77018F-10\u003c\/strong\u003e, V-18 O\/B pattern\u003c\/li\u003e\n\u003cli\u003eBoat centreline: \u003cstrong\u003e18 ft 6 in\u003c\/strong\u003e; maximum beam: \u003cstrong\u003e96 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor V-hull outboard runabouts, including compatible Euro-style profiles\u003c\/li\u003e\n\u003cli\u003eWindshield allowance: up to 20 in; bow rails: up to 8 in\u003c\/li\u003e\n\u003cli\u003eAttached outboard motor cover and boat-cover tie-down kit included\u003c\/li\u003e\n\u003cli\u003eSlate Gray Poly-Flex II, 5.3 oz solution-dyed marine polyester; breathable, UV- and water-resistant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMeasure before ordering\u003c\/h2\u003e\u003cp\u003eCheck the boat's centreline, beam, rail height and windshield shape, including equipment that extends past the transom. Not for boats fitted with a wakeboard tower. Follow the cover's fitting and securing instructions for storage or trailer transport.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378009911502,"sku":"05-4164","price":276.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_ac0d1a01-e06d-4b7b-93fd-ce1188bfb5a1.jpg?v=1789844241"},{"product_id":"carver-v-hull-runabout-boat-cover-18-5-ft-x-96-in-77118s-11","title":"Carver 77118S-11 Sun-DURA I\/O V-Hull Runabout Cover - 18 ft 6 in, 96 in Beam","description":"\u003cp\u003eProtect a V-hull runabout with an inboard\/outdrive using the \u003cstrong\u003eCarver 77118S-11 Styled-to-Fit cover\u003c\/strong\u003e. The Mist Gray Sun-DURA fabric is cut for the 18 ft 6 in V-18 I\/O profile, including compatible bow rails and a windshield. It does not have the attached motor-cover section used by outboard models.\u003c\/p\u003e\u003ch2\u003eSpecifications and fit\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e77118S-11\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBoat centreline: \u003cstrong\u003e18 ft 6 in\u003c\/strong\u003e; maximum beam: \u003cstrong\u003e96 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor V-hull I\/O runabouts with windshield up to 20 in high and bow rails up to 8 in\u003c\/li\u003e\n\u003cli\u003eMist Gray Sun-DURA, 7.6 oz solution-dyed marine polyester\u003c\/li\u003e\n\u003cli\u003eBreathable, water-repellent fabric with UV and mildew resistance\u003c\/li\u003e\n\u003cli\u003eIntegrated shock-cord hem and boat-cover tie-down kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eVerify the boat's engine arrangement, windshield, rail dimensions and overall centreline. The 77018 outboard series is a different cover pattern even though its length and beam match. Covers for boats with towers require a different configuration.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378009944270,"sku":"07-1849","price":486.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_31a8906a-acc5-44b8-ad09-43ed5c352db3.jpg?v=1789844248"},{"product_id":"carver-v-hull-runabout-boat-cover-19-5-ft-x-96-in-77119f-10","title":"Carver 77119F-10 Poly-Flex II I\/O Runabout Cover - 19 ft 6 in, 96 in Beam","description":"\u003cp\u003eThe \u003cstrong\u003eCarver 77119F-10\u003c\/strong\u003e offers practical protection for a 19 ft 6 in V-hull runabout with an inboard\/outdrive. Its Slate Gray Poly-Flex II construction is lightweight and breathable, making it easier to fit over the windshield and cockpit before storage.\u003c\/p\u003e\u003ch2\u003eFit and construction\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCarver part number: \u003cstrong\u003e77119F-10\u003c\/strong\u003e; V-19 I\/O design\u003c\/li\u003e\n\u003cli\u003eBoat centreline: \u003cstrong\u003e19 ft 6 in\u003c\/strong\u003e; maximum beam: \u003cstrong\u003e96 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor compatible V-hull\/Eure-style runabouts with I\/O power\u003c\/li\u003e\n\u003cli\u003eWindshield-height allowance: up to 20 in; bow rails: up to 8 in\u003c\/li\u003e\n\u003cli\u003ePoly-Flex II, Slate Gray, 5.3 oz solution-dyed marine polyester\u003c\/li\u003e\n\u003cli\u003eShock-cord hem and boat-cover tie-down kit supplied\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFit check\u003c\/h2\u003e\u003cp\u003eMeasure centreline length, beam and raised deck fittings before choosing this size. This is a Styled-to-Fit boat-pattern cover, not a make\/model-specific custom cover or an outboard motor-cover design. Boats equipped with towers need a compatible specialty cover.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378009977038,"sku":"05-4244","price":351.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_ca3fd761-a617-4ff4-bdd8-7602dc1e71ab.jpg?v=1789844254"},{"product_id":"carver-v-hull-runabout-boat-cover-19-5-ft-x-96-in-77119s-11","title":"Carver 77119S-11 Sun-DURA Inboard\/Outdrive Runabout Cover - 19 ft 6 in, 96 in Beam","description":"\u003cp\u003eProtect a compatible V-hull runabout with an inboard\/outdrive using the \u003cstrong\u003eCarver 77119S-11 Styled-to-Fit boat cover\u003c\/strong\u003e. This Mist Gray Sun-DURA model is shaped for a 19 ft 6 in boat with a windshield and bow rails. The engine configuration matters: this I\/O pattern is different from a cover with an attached outboard-motor section.\u003c\/p\u003e\u003ch2\u003eFit and specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e77119S-11\u003c\/strong\u003e; V-19 I\/O pattern\u003c\/li\u003e\n\u003cli\u003eBoat centreline length: \u003cstrong\u003e19 ft 6 in\u003c\/strong\u003e; maximum beam: \u003cstrong\u003e96 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eV-hull runabout with inboard\/outdrive, including compatible Euro-style layouts\u003c\/li\u003e\n\u003cli\u003eWindshield allowance: up to 20 in; bow rail allowance: up to 8 in\u003c\/li\u003e\n\u003cli\u003eFabric: \u003cstrong\u003eSun-DURA\u003c\/strong\u003e solution-dyed marine polyester, Mist Gray; breathable and water-repellent\u003c\/li\u003e\n\u003cli\u003eBoat-cover tie-down kit included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eMeasure the boat's centreline and beam, confirm its I\/O drive configuration and check windshield and rail dimensions. The pattern is not intended for a wakeboard tower or all boats of the listed size. Follow the installation instructions for cover support and securing during storage or trailering.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378010009806,"sku":"07-4799","price":234.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_8ec44813-4ec0-42a8-a59c-7e63880ab5be.jpg?v=1790477372"},{"product_id":"carver-v-hull-runabout-boat-cover-20-ft-6-in-x-102-in-77120f-10","title":"Carver 77120F-10 Poly-Flex II Inboard\/Outdrive Runabout Cover - 20 ft 6 in, 102 in Beam","description":"\u003cp\u003eProtect a compatible V-hull runabout with an inboard\/outdrive using the \u003cstrong\u003eCarver 77120F-10 Styled-to-Fit boat cover\u003c\/strong\u003e. This Slate Gray Poly-Flex II model is shaped for a 20 ft 6 in boat with a windshield and bow rails. The engine configuration matters: this I\/O pattern is different from a cover with an attached outboard-motor section.\u003c\/p\u003e\u003ch2\u003eFit and specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e77120F-10\u003c\/strong\u003e; V-20 I\/O pattern\u003c\/li\u003e\n\u003cli\u003eBoat centreline length: \u003cstrong\u003e20 ft 6 in\u003c\/strong\u003e; maximum beam: \u003cstrong\u003e102 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eV-hull runabout with inboard\/outdrive, including compatible Euro-style layouts\u003c\/li\u003e\n\u003cli\u003eWindshield allowance: up to 20 in; bow rail allowance: up to 8 in\u003c\/li\u003e\n\u003cli\u003eFabric: \u003cstrong\u003ePoly-Flex II\u003c\/strong\u003e solution-dyed marine polyester, Slate Gray; breathable and water-repellent\u003c\/li\u003e\n\u003cli\u003eBoat-cover tie-down kit included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eMeasure the boat's centreline and beam, confirm its I\/O drive configuration and check windshield and rail dimensions. The pattern is not intended for a wakeboard tower or all boats of the listed size. Follow the installation instructions for cover support and securing during storage or trailering.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378010042574,"sku":"05-4215","price":290.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_2fbaead5-54c6-4441-99d7-e7a5735741a7.jpg?v=1789844269"},{"product_id":"carver-v-hull-runabout-boat-cover-21-5-ft-x-102-in-77121s-11","title":"Carver 77121S-11 Sun-DURA Inboard\/Outdrive Runabout Cover - 21 ft 6 in, 102 in Beam","description":"\u003cp\u003eProtect a compatible V-hull runabout with an inboard\/outdrive using the \u003cstrong\u003eCarver 77121S-11 Styled-to-Fit boat cover\u003c\/strong\u003e. This Mist Gray Sun-DURA model is shaped for a 21 ft 6 in boat with a windshield and bow rails. The engine configuration matters: this I\/O pattern is different from a cover with an attached outboard-motor section.\u003c\/p\u003e\u003ch2\u003eFit and specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e77121S-11\u003c\/strong\u003e; V-21 I\/O pattern\u003c\/li\u003e\n\u003cli\u003eBoat centreline length: \u003cstrong\u003e21 ft 6 in\u003c\/strong\u003e; maximum beam: \u003cstrong\u003e102 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eV-hull runabout with inboard\/outdrive, including compatible Euro-style layouts\u003c\/li\u003e\n\u003cli\u003eWindshield allowance: up to 20 in; bow rail allowance: up to 8 in\u003c\/li\u003e\n\u003cli\u003eFabric: \u003cstrong\u003eSun-DURA\u003c\/strong\u003e solution-dyed marine polyester, Mist Gray; breathable and water-repellent\u003c\/li\u003e\n\u003cli\u003eBoat-cover tie-down kit included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eMeasure the boat's centreline and beam, confirm its I\/O drive configuration and check windshield and rail dimensions. The pattern is not intended for a wakeboard tower or all boats of the listed size. Follow the installation instructions for cover support and securing during storage or trailering.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378010075342,"sku":"05-4206","price":662.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_4ce19e9f-09ac-41e5-8312-d79a332e1cd3.jpg?v=1790477384"},{"product_id":"carver-v-hull-runabout-boat-cover-22-5-ft-x-102-in-77122s-11","title":"Carver 77122S-11 Sun-DURA Inboard\/Outdrive Runabout Cover - 22 ft 6 in, 102 in Beam","description":"\u003cp\u003eProtect a compatible V-hull runabout with an inboard\/outdrive using the \u003cstrong\u003eCarver 77122S-11 Styled-to-Fit boat cover\u003c\/strong\u003e. This Mist Gray Sun-DURA model is shaped for a 22 ft 6 in boat with a windshield and bow rails. The engine configuration matters: this I\/O pattern is different from a cover with an attached outboard-motor section.\u003c\/p\u003e\u003ch2\u003eFit and specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e77122S-11\u003c\/strong\u003e; V-22 I\/O pattern\u003c\/li\u003e\n\u003cli\u003eBoat centreline length: \u003cstrong\u003e22 ft 6 in\u003c\/strong\u003e; maximum beam: \u003cstrong\u003e102 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eV-hull runabout with inboard\/outdrive, including compatible Euro-style layouts\u003c\/li\u003e\n\u003cli\u003eWindshield allowance: up to 20 in; bow rail allowance: up to 8 in\u003c\/li\u003e\n\u003cli\u003eFabric: \u003cstrong\u003eSun-DURA\u003c\/strong\u003e solution-dyed marine polyester, Mist Gray; breathable and water-repellent\u003c\/li\u003e\n\u003cli\u003eBoat-cover tie-down kit included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eMeasure the boat's centreline and beam, confirm its I\/O drive configuration and check windshield and rail dimensions. The pattern is not intended for a wakeboard tower or all boats of the listed size. Follow the installation instructions for cover support and securing during storage or trailering.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378010108110,"sku":"05-4172","price":320.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_379f1ed4-d1c7-40d8-9af0-384a2180f5f9.jpg?v=1789844282"},{"product_id":"carver-v-hull-bass-boat-cover-18-5-ft-x-96-in-77218s-11","title":"Carver 77218S-11 Sun-DURA Wide Bass Boat Cover - 18 ft 6 in, 96 in Beam","description":"\u003cp\u003eCover a wide outboard-powered bass boat between outings with the \u003cstrong\u003eCarver 77218S-11\u003c\/strong\u003e. Its WB-18 Styled-to-Fit pattern accommodates a wide fishing deck, bow-mounted trolling motor, depth finder and pedestal seats with their backs folded down. The Mist Gray Sun-DURA fabric protects the boat from sun, rain and storage dirt.\u003c\/p\u003e\u003ch2\u003eFit specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e77218S-11\u003c\/strong\u003e; WB-18 wide bass-boat pattern\u003c\/li\u003e\n\u003cli\u003eBoat centerline: \u003cstrong\u003e18 ft 6 in\u003c\/strong\u003e; maximum beam: \u003cstrong\u003e96 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor wide bass boats with outboard power; accommodates windscreen up to \u003cstrong\u003e12 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eAllowance for trolling motor, depth finder and folded-back pedestal seating\u003c\/li\u003e\n\u003cli\u003eAttached outboard motor-cover section and boat-cover tie-down kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSun-DURA\u003c\/strong\u003e: 7.6 oz solution-dyed marine polyester in Mist Gray\u003c\/li\u003e\n\u003cli\u003eBreathable, water-repellent construction with UV and mildew resistance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMeasure before ordering\u003c\/h2\u003e\u003cp\u003eCheck the boat's centerline length, beam, windscreen height and raised fishing equipment. If the outboard is mounted on a jack plate, include the plate's added length when selecting a cover. This is a wide bass-boat cover, not the SKIFF-18 center-console pattern.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378010206414,"sku":"05-4200","price":500.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_0f954b49-df8f-4d2d-bbbb-a6accba3c855.jpg?v=1789844289"},{"product_id":"carver-pontoon-boat-cover-18-5-ft-x-102-in-77518p-10","title":"Carver 77518P-10 Poly-Guard Pontoon Boat Cover - 18 ft 6 in Deck, 102 in Width","description":"\u003cp\u003eCover the deck and seating of a compatible pontoon with the \u003cstrong\u003eCarver 77518P-10 Styled-to-Fit cover\u003c\/strong\u003e. It belongs to Carver's Poly-Guard FED pontoon series, designed for an \u003cstrong\u003e18 ft 6 in deck\u003c\/strong\u003e with a width of \u003cstrong\u003e102 inches\u003c\/strong\u003e and full-length perimeter rails.\u003c\/p\u003e\u003ch2\u003eFit and construction\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 77518P-10; base pattern 77518P\u003c\/li\u003e\n\u003cli\u003eDeck length: \u003cstrong\u003e18 ft 6 in\u003c\/strong\u003e; deck width: \u003cstrong\u003e102 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor pontoons whose rails fully enclose the deck\u003c\/li\u003e\n\u003cli\u003eMaterial: gray Poly-Guard marine cover fabric\u003c\/li\u003e\n\u003cli\u003eDesigned to fit over a large four-bow Bimini when folded and stored without its trailering strut\u003c\/li\u003e\n\u003cli\u003eThree sewn-in patches for compatible Carver boat-cover support poles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eMeasure the deck itself, rather than the pontoon tubes or overall boat length, and confirm that the rails fully enclose the deck. Pontoon layouts with an open forward deck use a different cover series. The boat-cover support poles are sold separately; do not assume they are included. Verify included accessories for the specific packaged part before ordering.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378010239182,"sku":"27-9492","price":68.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_2d555e05-e117-4b45-82a6-53f0523e67aa.jpg?v=1789844295"},{"product_id":"carver-pontoon-boat-cover-18-5-ft-x-102-in-77518s-11","title":"Carver 77518S-11 Sun-DURA Fully Enclosed Pontoon Cover - 18 ft 6 in Deck, 102 in Wide","description":"\u003cp\u003eKeep the seating and deck of a compatible pontoon sheltered with the \u003cstrong\u003eCarver 77518S-11 Styled-to-Fit cover\u003c\/strong\u003e. The FED-18 pattern is made for pontoons whose rails \u003cstrong\u003efully enclose the deck\u003c\/strong\u003e, with a deck length of \u003cstrong\u003e18 ft 6 in\u003c\/strong\u003e and a width of \u003cstrong\u003e102 inches\u003c\/strong\u003e. Mist Gray Sun-DURA fabric provides breathable, water-repellent outdoor protection.\u003c\/p\u003e\u003ch2\u003eFit and included items\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e77518S-11\u003c\/strong\u003e; FED-18 pontoon pattern\u003c\/li\u003e\n\u003cli\u003ePontoon deck: \u003cstrong\u003e18 ft 6 in long × 102 in wide\u003c\/strong\u003e, with fully enclosing rails\u003c\/li\u003e\n\u003cli\u003eFabric: \u003cstrong\u003eSun-DURA\u003c\/strong\u003e, 7.6 oz solution-dyed marine polyester, Mist Gray\u003c\/li\u003e\n\u003cli\u003eHeavy-duty shock cord in the hem and boat-cover tie-down kit\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeparate outboard motor cover included\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eAccommodates a large four-bow Bimini top when folded and stored \u003cstrong\u003ewithout its trailering strut\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFit and storage guidance\u003c\/h2\u003e\u003cp\u003eMeasure the pontoon deck, not the tubes or overall boat length, and confirm that the rails enclose the entire deck. This FED pattern differs from covers for open front-deck or fishing-chair configurations. Proper cover support is essential to prevent water pooling; Carver recommends at least three vented support poles or two Y-strap systems, sold separately.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378010271950,"sku":"05-4163","price":533.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_511a2277-f5b2-4980-9f81-b1d6f338ef59.jpg?v=1789844303"},{"product_id":"carver-pontoon-boat-cover-22-5-ft-x-102-in-77522p-10","title":"Carver 77522P-10 Poly-Guard Fully Enclosed Pontoon Cover - 22 ft 6 in Deck, 102 in Wide","description":"\u003cp\u003eCover a longer pontoon with the \u003cstrong\u003eCarver 77522P-10 Styled-to-Fit cover\u003c\/strong\u003e. This FED-22 pattern is intended for pontoon boats with a Bimini top and rails that \u003cstrong\u003efully enclose the deck\u003c\/strong\u003e, measuring \u003cstrong\u003e22 ft 6 in long\u003c\/strong\u003e by up to \u003cstrong\u003e102 inches wide\u003c\/strong\u003e. Its Haze Gray Performance Poly-Guard material offers durable, breathable, water-repellent protection during storage.\u003c\/p\u003e\u003ch2\u003eSize and construction\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e77522P-10\u003c\/strong\u003e; FED-22 pontoon pattern\u003c\/li\u003e\n\u003cli\u003eDeck dimensions: \u003cstrong\u003e22 ft 6 in long × 102 in wide\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFabric: \u003cstrong\u003ePerformance Poly-Guard\u003c\/strong\u003e, 8 oz marine-grade polyester, Haze Gray\u003c\/li\u003e\n\u003cli\u003eDesigned for pontoons with a Bimini and fully enclosing perimeter rails\u003c\/li\u003e\n\u003cli\u003eHeavy-duty boat-cover tie-down straps and \u003cstrong\u003eseparate outboard motor cover included\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eAllows a large four-bow Bimini top to be stored folded \u003cstrong\u003ewithout the trailering strut\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eMeasure the deck rather than the pontoon tubes, and confirm that its rails fully enclose the deck. This is not a cover for a forward open-deck pontoon. Appropriate support poles or Y-strap systems are sold separately and help prevent water pooling. Carver recommends additional tie-down hardware for covers on boats 20 ft and longer.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378010304718,"sku":"27-9494","price":406.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_d86eba29-1ae6-41e9-aca1-55bca428d761.jpg?v=1790451712"},{"product_id":"carver-jon-style-boat-cover-15-5-ft-x-70-in-77815f-10","title":"Carver 77815F-10 Poly-Flex II Jon-Style Bass Boat Cover - 15 ft 6 in, 70 in Beam","description":"\u003cp\u003eProtect a single-console Jon-style bass boat with the \u003cstrong\u003eCarver 77815F-10 Styled-to-Fit cover\u003c\/strong\u003e. Its Slate Gray Poly-Flex II fabric follows the low deck profile of compatible outboard-powered Jon-style bass boats measuring \u003cstrong\u003e15 ft 6 in along the centreline\u003c\/strong\u003e, with a maximum \u003cstrong\u003e70-inch beam\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003eFit and features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e77815F-10\u003c\/strong\u003e; Carver Jon-15 pattern\u003c\/li\u003e\n\u003cli\u003eCentreline length: \u003cstrong\u003e15 ft 6 in\u003c\/strong\u003e; maximum beam: \u003cstrong\u003e70 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eDesigned for a single console; accommodates specified trolling motor, depth finder and pedestal seating arrangements with seat backs folded\u003c\/li\u003e\n\u003cli\u003eSlate Gray Poly-Flex II solution-dyed marine polyester\u003c\/li\u003e\n\u003cli\u003eWater-repellent, breathable fabric with UV and mildew resistance\u003c\/li\u003e\n\u003cli\u003eAttached outboard motor-cover section and tie-down kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCheck fit before ordering\u003c\/h2\u003e\u003cp\u003eMeasure the complete centreline and beam and confirm the console and accessory arrangement. If the outboard is mounted on a jack plate, account for the jack plate's extra length when selecting the cover size. This is a boat-style pattern, not a guaranteed exact fit by make or model.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378010501326,"sku":"05-4204","price":210.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_aa8bba61-65c0-4aed-b523-6ad112e370a8.jpg?v=1789844317"},{"product_id":"carver-jon-style-bass-boat-cover-18-5-ft-x-94-in-77818ef-10","title":"Carver 77818EF-10 Poly-Flex II Extra-Wide Jon Bass Boat Cover - 18 ft 6 in, 94 in Beam","description":"\u003cp\u003eCover an extra-wide Jon-style bass boat with the \u003cstrong\u003eCarver 77818EF-10 Styled-to-Fit cover\u003c\/strong\u003e. The Jon-18XW pattern is sized for boats with an \u003cstrong\u003e18 ft 6 in centreline\u003c\/strong\u003e and a maximum \u003cstrong\u003e94-inch beam\u003c\/strong\u003e, providing more width than the standard Jon-18 version. Its Slate Gray Poly-Flex II fabric protects the single-console cockpit and surrounding deck.\u003c\/p\u003e\u003ch2\u003eFit and fabric\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e77818EF-10\u003c\/strong\u003e; extra-wide Jon-18XW pattern\u003c\/li\u003e\n\u003cli\u003eCentreline: \u003cstrong\u003e18 ft 6 in\u003c\/strong\u003e; maximum beam: \u003cstrong\u003e94 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor compatible single-console outboard Jon-style bass boats\u003c\/li\u003e\n\u003cli\u003eProvides allowance for specified trolling motor, depth finder and folded-back pedestal-seat layouts\u003c\/li\u003e\n\u003cli\u003ePoly-Flex II, Slate Gray solution-dyed marine polyester with breathable, water-repellent finish\u003c\/li\u003e\n\u003cli\u003eAttached outboard motor-cover section and tie-down kit included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eChoosing the correct width\u003c\/h2\u003e\u003cp\u003eMeasure centreline length and beam, including the effects of console equipment and a motor jack plate. If the boat has an 84-inch beam, compare the standard-width \u003cstrong\u003e77818F-10\u003c\/strong\u003e instead. An exact model-year fit is not established by the dimensions alone.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378010534094,"sku":"07-6322","price":241.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_c9bef653-4d0e-4156-9244-ca14c12c8535.jpg?v=1790477424"},{"product_id":"carver-jon-style-boat-cover-18-ft-6-in-x-84-in-77818f-10","title":"Carver 77818F-10 Poly-Flex II Jon-Style Bass Boat Cover - 18 ft 6 in, 84 in Beam","description":"\u003cp\u003eKeep a larger Jon-style bass boat protected during storage and trailering with the \u003cstrong\u003eCarver 77818F-10\u003c\/strong\u003e. The standard-width Jon-18 pattern fits compatible single-console, outboard-powered boats with an \u003cstrong\u003e18 ft 6 in centreline\u003c\/strong\u003e and a maximum \u003cstrong\u003e84-inch beam\u003c\/strong\u003e. Its breathable Slate Gray Poly-Flex II fabric helps protect the cockpit and deck against outdoor exposure.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e77818F-10\u003c\/strong\u003e; standard-width Jon-18\u003c\/li\u003e\n\u003cli\u003eCentreline: \u003cstrong\u003e18 ft 6 in\u003c\/strong\u003e; maximum beam: \u003cstrong\u003e84 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor Jon-style bass boats with a single console\u003c\/li\u003e\n\u003cli\u003ePattern accommodates typical trolling motors, depth finders and pedestal seats with their backs folded\u003c\/li\u003e\n\u003cli\u003eSlate Gray Poly-Flex II solution-dyed marine polyester; water-repellent, UV- and mildew-resistant\u003c\/li\u003e\n\u003cli\u003eIntegrated outboard motor-cover section and tie-down kit included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore buying\u003c\/h2\u003e\u003cp\u003eCompare the boat's full centreline length, beam and console layout to this standard-width pattern. The extra-wide \u003cstrong\u003e77818EF-10\u003c\/strong\u003e is designed for a 94-inch beam and is a different cover. Include any jack plate extension when determining the required length.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378010599630,"sku":"05-4194","price":341.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_457d5cf3-9c8b-4b7c-8239-e2734f3b04db.jpg?v=1789844331"},{"product_id":"carver-v-hull-bass-boat-cover-14-to-16-ft-x-78-in-79001","title":"Carver 79001 Flex-Fit PRO V-Hull Fishing, Jon and Narrow Bass Boat Cover - 14–16 ft, 78 in Beam","description":"\u003cp\u003eCover a smaller fishing boat with a single fitted layer using the Carver 79001 Flex-Fit PRO. This version suits certain V-hull fishing boats, narrow bass boats, Jon boats, open Jon boats and drift boats, as long as the boat's shape and measurements are within the pattern.\u003c\/p\u003e\u003ch2\u003eFit and construction\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e79001\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBoat centreline length: \u003cstrong\u003e14–16 ft\u003c\/strong\u003e; maximum beam width: \u003cstrong\u003e78 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSlate Gray Poly-Flex II, lightweight \u003cstrong\u003e5.3 oz 300 × 300-denier solution-dyed marine polyester\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eWater-repellent, breathable material with resistance to UV exposure and mildew\u003c\/li\u003e\n\u003cli\u003eShock cord inside the hem for a closer fit\u003c\/li\u003e\n\u003cli\u003eIncludes a tie-down kit and mesh storage bag\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eChoosing the right fit\u003c\/h2\u003e\u003cp\u003eChoose this narrower 78-inch-beam cover instead of a wider runabout pattern if it matches your hull. Check the bow profile, accessories and full centreline length before ordering. Secure the cover and follow its fitting instructions before storage or trailering. Dimensions and boat style are fit guidelines, not guaranteed make\/model compatibility.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378010632398,"sku":"27-9427","price":214.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_1d600492-74b2-46c2-a1fd-47d69470bd3f.jpg?v=1790477456"},{"product_id":"carver-v-hull-runabout-boat-cover-14-to-16-ft-x-86-in-79002","title":"Carver 79002 Flex-Fit PRO V-Hull and Tri-Hull Runabout Cover - 14–16 ft, 86 in Beam","description":"\u003cp\u003eThe Carver 79002 Flex-Fit PRO cover helps shelter a small V-hull runabout or compatible tri-hull boat when it's parked. This 86-inch-beam version is designed for a different profile from the narrower 79001 fishing-boat cover.\u003c\/p\u003e\u003ch2\u003eFit and materials\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 79002\u003c\/li\u003e\n\u003cli\u003eBoat centreline length: \u003cstrong\u003e14–16 ft\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum beam: \u003cstrong\u003e86 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePoly-Flex II Slate Gray solution-dyed polyester, 5.3 oz, 300 × 300 denier\u003c\/li\u003e\n\u003cli\u003eWater-repellent, breathable fabric with UV and mildew resistance\u003c\/li\u003e\n\u003cli\u003eShock-cord hem, tie-down kit and mesh storage bag\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMeasure before ordering\u003c\/h2\u003e\u003cp\u003eCheck the complete length, widest beam, windshield, bow rails and other raised hardware against the specified hull shape. The boat size is a selection guide rather than a guaranteed make\/model fit. Use the manufacturer's securing instructions for storage or trailering.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378010665166,"sku":"27-9428","price":118.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_edb4bea5-27a1-4b41-b365-bef140925ffe.jpg?v=1789844346"},{"product_id":"carver-v-hull-bass-boat-cover-16-to-19-ft-x-96-in-79003","title":"Carver 79003 Flex-Fit PRO Fish-and-Ski and Wide Bass Boat Cover - 16–19 ft, 96 in Beam","description":"\u003cp\u003eGive a fish-and-ski or wide bass boat practical storage protection with Carver 79003. The Flex-Fit PRO pattern accommodates selected 16–19-foot boats and provides enough width for hulls up to 96 inches across the beam.\u003c\/p\u003e\u003ch2\u003eFit and construction\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e79003\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBoat centreline length: \u003cstrong\u003e16–19 ft\u003c\/strong\u003e; maximum beam width: \u003cstrong\u003e96 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSlate Gray Poly-Flex II, lightweight \u003cstrong\u003e5.3 oz 300 × 300-denier solution-dyed marine polyester\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eWater-repellent, breathable material with resistance to UV exposure and mildew\u003c\/li\u003e\n\u003cli\u003eShock cord inside the hem for a closer fit\u003c\/li\u003e\n\u003cli\u003eIncludes a tie-down kit and mesh storage bag\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eChoosing the right fit\u003c\/h2\u003e\u003cp\u003eCarver also lists certain tournament ski boats in this size group. Measure the boat's true centreline length and widest beam, then check windshield and other raised equipment before assuming the shape will fit. Secure the cover and follow its fitting instructions before storage or trailering. Dimensions and boat style are fit guidelines, not guaranteed make\/model compatibility.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378010697934,"sku":"27-9429","price":271.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_535033ac-cedb-4490-b01a-3da45e671ba9.jpg?v=1789844353"},{"product_id":"carver-v-hull-runabout-boat-cover-17-to-19-ft-x-96-in-79004","title":"Carver 79004 Flex-Fit PRO V-Hull and Tri-Hull Runabout Cover - 17–19 ft, 96 in Beam","description":"\u003cp\u003eKeep a mid-size runabout protected between outings with the Carver 79004 Flex-Fit PRO. Its pattern serves compatible 17–19-foot V-hull and tri-hull runabouts rather than all boats with the same hull length.\u003c\/p\u003e\u003ch2\u003eFit and materials\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 79004\u003c\/li\u003e\n\u003cli\u003eBoat centreline length: \u003cstrong\u003e17–19 ft\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum beam: \u003cstrong\u003e96 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePoly-Flex II Slate Gray solution-dyed polyester, 5.3 oz, 300 × 300 denier\u003c\/li\u003e\n\u003cli\u003eWater-repellent, breathable fabric with UV and mildew resistance\u003c\/li\u003e\n\u003cli\u003eShock-cord hem, tie-down kit and mesh storage bag\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMeasure before ordering\u003c\/h2\u003e\u003cp\u003eCheck the complete length, widest beam, windshield, bow rails and other raised hardware against the specified hull shape. The boat size is a selection guide rather than a guaranteed make\/model fit. Use the manufacturer's securing instructions for storage or trailering.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378010730702,"sku":"27-9430","price":271.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_e318d7a8-a185-4384-ab46-f65d7feadbde.jpg?v=1789844360"},{"product_id":"carver-v-hull-runabout-boat-cover-20-to-21-ft-x-102-in-79005","title":"Carver 79005 Flex-Fit PRO V-Hull Runabout Cover - 20–21 ft, 102 in Beam","description":"\u003cp\u003eKeep a mid-size runabout sheltered between trips with the \u003cstrong\u003eCarver 79005 Flex-Fit PRO boat cover\u003c\/strong\u003e. Cut for compatible V-hull runabouts with inboard\/outboard or outboard power, this Slate Gray cover fits \u003cstrong\u003e20–21-foot boat centreline lengths\u003c\/strong\u003e with a maximum \u003cstrong\u003e102-inch beam\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003eFit and materials\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e79005\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBoat type: V-hull runabout with I\/O or outboard engine\u003c\/li\u003e\n\u003cli\u003eCentreline length: \u003cstrong\u003e20–21 ft\u003c\/strong\u003e; maximum beam: \u003cstrong\u003e102 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePoly-Flex II: 5.3 oz, 300 × 300-denier solution-dyed marine polyester in Slate Gray\u003c\/li\u003e\n\u003cli\u003eBreathable, water-repellent polyurethane finish with UV and mildew resistance\u003c\/li\u003e\n\u003cli\u003eFolded four-ply seams, double stitching and weather-resistant thread\u003c\/li\u003e\n\u003cli\u003e1\/4-inch shock cord in the hem, reinforced tie-down loops, tie-down kit and mesh storage bag included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eMeasure the boat's centreline length and widest beam, allowing for windshield height, bow rails and accessories. This universal pattern is intended for the specified hull profile and is not a guaranteed fit for every boat of the same length. Follow the installation instructions to secure the cover for storage or trailering.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378010763470,"sku":"27-9431","price":299.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_3f74e3b3-c444-442f-bce5-0d83884c0299.jpg?v=1790477490"},{"product_id":"carver-v-hull-cuddy-cabin-boat-cover-19-to-22-ft-x-102-in-79006","title":"Carver 79006 Flex-Fit PRO Low-Profile Cuddy Cabin Cover - 19–22 ft, 102 in Beam","description":"\u003cp\u003eGive a low-profile cuddy cabin boat practical storage and trailering protection with the \u003cstrong\u003eCarver 79006 Flex-Fit PRO cover\u003c\/strong\u003e. This Slate Gray cover is sized for \u003cstrong\u003e19–22-foot V-hull cuddy cabin boats\u003c\/strong\u003e with inboard\/outboard or outboard power, up to a \u003cstrong\u003e102-inch beam\u003c\/strong\u003e. It follows a low-cabin profile rather than the shape of a tall cabin cruiser.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e79006\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBoat style: low-profile V-hull cuddy cabin, I\/O or outboard\u003c\/li\u003e\n\u003cli\u003eCentreline length: \u003cstrong\u003e19–22 ft\u003c\/strong\u003e; maximum beam: \u003cstrong\u003e102 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSlate Gray Poly-Flex II, 5.3 oz 300 × 300-denier solution-dyed marine polyester\u003c\/li\u003e\n\u003cli\u003eWater-repellent, breathable fabric with UV and mildew resistance\u003c\/li\u003e\n\u003cli\u003eDouble-stitched four-ply seams and reinforced tie-down loops\u003c\/li\u003e\n\u003cli\u003eHeavy-duty shock-cord hem, tie-down kit and mesh storage bag included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFit guidance\u003c\/h2\u003e\u003cp\u003eCheck the cuddy cabin roofline, windshield, overall centreline length and beam. A taller cabin or oversized hardware may require another cover shape. Measure before ordering and use the supplied tie-down instructions when preparing for storage or trailering.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378010796238,"sku":"27-9432","price":352.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_0a2bda8f-572f-4cbf-97c2-a7e8236c8df5.jpg?v=1790477501"},{"product_id":"carver-pontoon-boat-cover-20-to-22-ft-x-102-in-79009","title":"Carver 79009 Flex-Fit PRO Pontoon Boat Cover - 20–22 ft, 102 in Beam","description":"\u003cp\u003eKeep a pontoon boat protected between outings with the \u003cstrong\u003eCarver 79009 Flex-Fit PRO cover\u003c\/strong\u003e. This Slate Gray universal cover is designed for compatible \u003cstrong\u003e20–22-foot pontoon boats\u003c\/strong\u003e with a maximum \u003cstrong\u003e102-inch beam\u003c\/strong\u003e, providing a lightweight option for storage or properly secured trailering.\u003c\/p\u003e\u003ch2\u003eFit and construction\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e79009\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBoat type: pontoon; centreline length \u003cstrong\u003e20–22 ft\u003c\/strong\u003e, maximum beam \u003cstrong\u003e102 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePoly-Flex II Slate Gray, 5.3 oz 300 × 300-denier solution-dyed marine polyester\u003c\/li\u003e\n\u003cli\u003eBreathable, water-repellent polyurethane-coated fabric with UV and mildew resistance\u003c\/li\u003e\n\u003cli\u003eDouble stitching, reinforced tie-down loops and four-ply seams\u003c\/li\u003e\n\u003cli\u003e1\/4-inch shock-cord hem, trailering tie-down kit and mesh storage bag included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eMeasure the pontoon's actual length and widest beam, and compare its railing and deck configuration with the cover's intended shape. Pontoon layouts with different rail arrangements or large accessories may require another pattern. The listed boat dimensions are a selection guide rather than confirmed model-specific fitment. Secure the cover according to the installation instructions.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378010829006,"sku":"27-9433","price":314.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_8d5d0657-9655-44e0-aadc-190bc88fd756.jpg?v=1789844380"},{"product_id":"carver-v-hull-runabout-boat-cover-22-to-23-ft-x-102-in-79010","title":"Carver 79010 Flex-Fit PRO V-Hull Runabout Cover - 22–23 ft, 102 in Beam","description":"\u003cp\u003eProtect a larger V-hull runabout while it is parked or prepared for trailering with the \u003cstrong\u003eCarver 79010 Flex-Fit PRO\u003c\/strong\u003e. This Slate Gray cover is intended for compatible \u003cstrong\u003e22–23-foot runabouts\u003c\/strong\u003e with inboard\/outboard or outboard power, with a maximum \u003cstrong\u003e102-inch beam\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003eProduct specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e79010\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBoat type: V-hull runabout, I\/O or outboard\u003c\/li\u003e\n\u003cli\u003eCentreline length: \u003cstrong\u003e22–23 ft\u003c\/strong\u003e; maximum beam: \u003cstrong\u003e102 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePoly-Flex II: Slate Gray 5.3 oz, 300 × 300-denier solution-dyed marine polyester\u003c\/li\u003e\n\u003cli\u003eBreathable, water-repellent polyurethane finish with resistance to UV and mildew\u003c\/li\u003e\n\u003cli\u003eFour-ply seams, double-stitch construction and reinforced tie-down loops\u003c\/li\u003e\n\u003cli\u003eShock-cord hem, tie-down kit and mesh storage bag included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eChoosing the correct cover\u003c\/h2\u003e\u003cp\u003eCheck the boat's full centreline length and beam, including the overall profile of the windshield and other raised equipment. The shorter \u003cstrong\u003e79005\u003c\/strong\u003e is the 20–21-foot model; the two are not interchangeable solely because they have the same beam limit. Follow the manufacturer's fitting and tie-down instructions before trailering.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378010861774,"sku":"27-9434","price":306.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_d3d36a4e-cd50-4887-9689-6a5d1e1318fc.jpg?v=1789844387"},{"product_id":"carver-v-hull-bass-boat-cover-17-to-19-ft-x-102-in-79011","title":"Carver 79011 Flex-Fit PRO Center Console Boat Cover - 17–19 ft, 102 in Beam","description":"\u003cp\u003eCover a centre-console fishing boat between trips with the \u003cstrong\u003eCarver 79011 Flex-Fit PRO\u003c\/strong\u003e. The pattern is intended for compatible 17–19-foot V-hull, shallow-draft and bay-style centre-console boats with a beam no wider than 102 inches. It is not a bass-boat-specific cover, and hull layout and console height still matter when checking fit.\u003c\/p\u003e\u003ch2\u003eFit and construction\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e79011\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBoat centreline length: \u003cstrong\u003e17–19 ft\u003c\/strong\u003e; maximum beam: \u003cstrong\u003e102 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBoat styles: selected V-hull centre-console fishing boats with high bow rails, shallow-draft centre consoles, and bay-style shallow-draft centre consoles\u003c\/li\u003e\n\u003cli\u003eSlate Gray \u003cstrong\u003ePoly-Flex II\u003c\/strong\u003e solution-dyed marine polyester, 5.3 oz, 300 × 300 denier\u003c\/li\u003e\n\u003cli\u003eWater-repellent, breathable fabric with UV and mildew resistance\u003c\/li\u003e\n\u003cli\u003eShock cord encased in the hem, tie-down kit and mesh storage bag included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eMeasure the complete centreline length and widest beam, and compare the console, bow rails, trolling-motor equipment and outboard arrangement with the cover shape. The manufacturer's boat-style and size guidelines do not establish a confirmed make\/model\/year fit. Secure the cover according to its installation directions for storage or trailering.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378010894542,"sku":"27-9435","price":177.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_127b8e56-8a4a-443f-8e39-928cd256aed8.jpg?v=1790477567"},{"product_id":"carver-v-hull-bass-boat-cover-20-to-22-ft-x-102-in-79012","title":"Carver 79012 Flex-Fit PRO Center Console Boat Cover - 20–22 ft, 102 in Beam","description":"\u003cp\u003eKeep a larger centre-console fishing boat sheltered during storage or properly secured transport with the \u003cstrong\u003eCarver 79012 Flex-Fit PRO\u003c\/strong\u003e. This Slate Gray cover is sized for selected V-hull and bay-style centre-console boats measuring \u003cstrong\u003e20–22 feet long\u003c\/strong\u003e with a maximum \u003cstrong\u003e102-inch beam\u003c\/strong\u003e. Its design is different from a low-profile bass-boat cover.\u003c\/p\u003e\u003ch2\u003eProduct details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e79012\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCentreline length: \u003cstrong\u003e20–22 ft\u003c\/strong\u003e; maximum boat beam: \u003cstrong\u003e102 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor compatible high-bow-rail V-hull centre consoles, shallow-draft centre consoles and shallow-draft bay-style centre consoles\u003c\/li\u003e\n\u003cli\u003eSlate Gray Poly-Flex II \u003cstrong\u003e5.3 oz solution-dyed polyester\u003c\/strong\u003e, 300 × 300 denier\u003c\/li\u003e\n\u003cli\u003eBreathable, water-repellent construction with UV and mildew resistance\u003c\/li\u003e\n\u003cli\u003eIncludes integrated shock-cord hem, tie-down kit and mesh storage bag\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFit guidance\u003c\/h2\u003e\u003cp\u003eCheck the boat's centreline length, beam and console\/rail profile before selecting this size. The 79011 is the shorter 17–19-foot option; the two sizes are not interchangeable merely because they have the same maximum beam. Fit is based on the boat's shape and measurements, not a guaranteed vehicle application.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378010927310,"sku":"27-9436","price":264.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_1f7d28eb-ea79-4780-80d5-e2bacc6689a2.jpg?v=1789844401"},{"product_id":"carver-sport-type-inflatable-boat-cover-10-5-ft-x-66-in-7inf10f-10","title":"Carver 7INF10F-10 Poly-Flex II Sport Inflatable Boat Cover - 10 ft 6 in, 66 in Beam","description":"\u003cp\u003eCover a sport-type inflatable boat with the Slate Gray Carver 7INF10F-10 Styled-to-Fit design. Its lightweight Poly-Flex II fabric protects the tubes and interior in storage while accommodating a compatible installed outboard motor.\u003c\/p\u003e\u003ch2\u003eMeasured fit and features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e7INF10F-10\u003c\/strong\u003e (INF-10 sport-type inflatable pattern)\u003c\/li\u003e\n\u003cli\u003eBoat centreline length: \u003cstrong\u003e10 ft 6 in\u003c\/strong\u003e; maximum beam: \u003cstrong\u003e66 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFabric: Slate Gray Poly-Flex II solution-dyed marine polyester, water-repellent and breathable\u003c\/li\u003e\n\u003cli\u003eDesigned to cover a compatible installed outboard; if the motor extends beyond the inflatable tubes, include that extension when choosing cover length\u003c\/li\u003e\n\u003cli\u003eIncludes a tie-down kit with six straps for this size\u003c\/li\u003e\n\u003cli\u003eNo allowance for a roll bar or tall centre console\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMeasure the actual hull centreline and width, including the motor arrangement. This cover is for a sport-type inflatable, not Carver's separate blunt-nose pattern.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStyle\u003c\/th\u003e\n\u003ctd\u003eSport-Type Inflatable Boat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection Type\u003c\/th\u003e\n\u003ctd\u003eMildew And UV Resistant\/ Water Repellent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColor\u003c\/th\u003e\n\u003ctd\u003eGray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePolyester\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVented\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWith Support Pole\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWith Strap\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWith Buckles\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWith Storage Bag\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003e10.5 ft Length Boat With Beam Width Up To 66 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUsed For\u003c\/th\u003e\n\u003ctd\u003eStorage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003ePart Identification\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCarver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e7INF10F-10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378010960078,"sku":"05-4335","price":114.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_edc35b65-cd7d-4fbf-8c7f-ece364c458f4.jpg?v=1789844409"},{"product_id":"carver-boat-cover-11-ft-6-in-x-68-in-7inf11bf-10","title":"Carver 7INF11BF-10 Poly-Flex II Blunt-Nose Inflatable Boat Cover - 11 ft 6 in, 68 in Beam","description":"\u003cp\u003eProtect a blunt-nose inflatable boat during storage with the \u003cstrong\u003eCarver 7INF11BF-10 Styled-to-Fit cover\u003c\/strong\u003e. Its Slate Gray Poly-Flex II fabric is designed around the shape of this inflatable-boat style, rather than being a universal cover for every hull of the same length.\u003c\/p\u003e\u003ch2\u003eDimensions and material\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 7INF11BF-10\u003c\/li\u003e\n\u003cli\u003eDesigned boat centreline: \u003cstrong\u003e11 ft 6 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum boat beam: \u003cstrong\u003e68 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBoat configuration: \u003cstrong\u003eblunt-nose inflatable with outboard\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFabric: lightweight Slate Gray Poly-Flex II, solution-dyed marine polyester\u003c\/li\u003e\n\u003cli\u003eBreathable, water-repellent material with UV and mildew resistance\u003c\/li\u003e\n\u003cli\u003eCover securing straps and buckles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eMeasure the boat's complete centreline length and widest beam. For outboard-equipped inflatables, include any motor extension beyond the tubes when determining the required cover length. This cover does not provide allowance for a roll bar or tall centre console. It is a protective cover, not an inflatable boat or Bimini top.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378011025614,"sku":"05-4286","price":135.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_c5fec05e-aae3-4808-8111-25b613444b97.jpg?v=1789844415"},{"product_id":"carver-boat-cover-12-ft-6-in-x-70-in-7inf12bf-10","title":"Carver 7INF12BF-10 Poly-Flex II Blunt-Nose Inflatable Boat Cover - 12 ft 6 in, 70 in Beam","description":"\u003cp\u003eProtect a blunt-nose inflatable boat during storage with the \u003cstrong\u003eCarver 7INF12BF-10 Styled-to-Fit cover\u003c\/strong\u003e. Its Slate Gray Poly-Flex II fabric is designed around the shape of this inflatable-boat style, rather than being a universal cover for every hull of the same length.\u003c\/p\u003e\u003ch2\u003eDimensions and material\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 7INF12BF-10\u003c\/li\u003e\n\u003cli\u003eDesigned boat centreline: \u003cstrong\u003e12 ft 6 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum boat beam: \u003cstrong\u003e70 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBoat configuration: \u003cstrong\u003eblunt-nose inflatable with outboard\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFabric: lightweight Slate Gray Poly-Flex II, solution-dyed marine polyester\u003c\/li\u003e\n\u003cli\u003eBreathable, water-repellent material with UV and mildew resistance\u003c\/li\u003e\n\u003cli\u003eCover securing straps and buckles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eMeasure the boat's complete centreline length and widest beam. For outboard-equipped inflatables, include any motor extension beyond the tubes when determining the required cover length. This cover does not provide allowance for a roll bar or tall centre console. It is a protective cover, not an inflatable boat or Bimini top.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378011058382,"sku":"05-4315","price":124.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_0a43597c-9b29-4df2-aec8-8f193c8912d3.jpg?v=1789844423"},{"product_id":"carver-sport-type-inflatable-boat-cover-12-5-ft-x-70-in-7inf12f-10","title":"Carver 7INF12F-10 Poly-Flex II Sport Inflatable Boat Cover - 12 ft 6 in, 70 in Beam","description":"\u003cp\u003eKeep a larger sport-type inflatable ready for the next trip with the Carver 7INF12F-10. This Slate Gray cover follows the sport-type hull profile rather than a blunt-nose or centre-console inflatable shape, with breathable Poly-Flex II fabric for outdoor storage.\u003c\/p\u003e\u003ch2\u003eMeasured fit and features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: \u003cstrong\u003e7INF12F-10\u003c\/strong\u003e (INF-12 sport-type inflatable pattern)\u003c\/li\u003e\n\u003cli\u003eBoat centreline length: \u003cstrong\u003e12 ft 6 in\u003c\/strong\u003e; maximum beam: \u003cstrong\u003e70 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFabric: Slate Gray Poly-Flex II solution-dyed marine polyester, water-repellent and breathable\u003c\/li\u003e\n\u003cli\u003eDesigned to cover a compatible installed outboard; if the motor extends beyond the inflatable tubes, include that extension when choosing cover length\u003c\/li\u003e\n\u003cli\u003eIncludes a tie-down kit with six straps for this size\u003c\/li\u003e\n\u003cli\u003eNo allowance for a roll bar or tall centre console\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMeasure the actual hull centreline and width, including the motor arrangement. This cover is for a sport-type inflatable, not Carver's separate blunt-nose pattern.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStyle\u003c\/th\u003e\n\u003ctd\u003eSport-Type Inflatable Boat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection Type\u003c\/th\u003e\n\u003ctd\u003eMildew And UV Resistant\/ Water Repellent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColor\u003c\/th\u003e\n\u003ctd\u003eGray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePolyester\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVented\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWith Support Pole\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWith Strap\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWith Buckles\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWith Storage Bag\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003e12.5 ft Length Boat With Beam Width Up To 70 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUsed For\u003c\/th\u003e\n\u003ctd\u003eStorage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003ePart Identification\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCarver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e7INF12F-10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378011091150,"sku":"05-4287","price":124.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_14ffbc3c-2a7f-41f1-b372-4936dbd36ca6.jpg?v=1789844431"},{"product_id":"carver-blunt-nose-inflatable-boat-cover-9-ft-6-in-x-60-in-7inf9bf-10","title":"Carver 7INF9BF-10 Poly-Flex II Blunt-Nose Inflatable Boat Cover - 9 ft 6 in, 60 in Beam","description":"\u003cp\u003eProtect a blunt-nose inflatable boat during storage with the \u003cstrong\u003eCarver 7INF9BF-10 Styled-to-Fit cover\u003c\/strong\u003e. Its Slate Gray Poly-Flex II fabric is designed around the shape of this inflatable-boat style, rather than being a universal cover for every hull of the same length.\u003c\/p\u003e\u003ch2\u003eDimensions and material\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 7INF9BF-10\u003c\/li\u003e\n\u003cli\u003eDesigned boat centreline: \u003cstrong\u003e9 ft 6 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum boat beam: \u003cstrong\u003e60 in\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBoat configuration: \u003cstrong\u003eblunt-nose inflatable with outboard\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFabric: lightweight Slate Gray Poly-Flex II, solution-dyed marine polyester\u003c\/li\u003e\n\u003cli\u003eBreathable, water-repellent material with UV and mildew resistance\u003c\/li\u003e\n\u003cli\u003eCover securing straps and buckles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eMeasure the boat's complete centreline length and widest beam. For outboard-equipped inflatables, include any motor extension beyond the tubes when determining the required cover length. This cover does not provide allowance for a roll bar or tall centre console. It is a protective cover, not an inflatable boat or Bimini top.\u003c\/p\u003e","brand":"Carver","offers":[{"title":"Default Title","offer_id":48378011123918,"sku":"05-4303","price":239.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/files\/ImageServerAPI_265f049b-5de4-4254-be1f-b3f245f88e44.jpg?v=1789844437"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3785\/6462\/collections\/ImageServerAPI_8d5d0657-9655-44e0-aadc-190bc88fd756.webp?v=1790091934","url":"https:\/\/newrvparts.com\/en-ca\/collections\/boat-covers.oembed?page=4","provider":"New RV Parts","version":"1.0","type":"link"}